Operating instructions
7
O il in s p e c t io n w in d o w
SUITABLE TYPES OF OIL
Mineral oils
Synthetic oils
Single-grade
oil
Multi-grade
oil
Actro EP
VDL 150
Actro EP
VDL 100
Regis SAE
20W-20
Xenic EP
VDL 100
BP Energol
RC 150
BP Energol
RC 100
BP Energol
HD-S SAE
20 W 20
BP Energol
RC-S100
Shell Corena
Öl H150D
Shell Corena
Öl H100D
Shell Rotella
X 20 W 20
V-Öl 7010
Compressor
oil 3022 N
Compressor
oil 3021 N
Essolube
HDX
Plus + 30
Mobil Rarus
429
Mobil Rarus
427
Mobil Rarus
829
Mobil Rarus
827
Liqui
Moly
LM
500
OIL CHANGE (only for units of type
GKTE, GKTZ, GKTZH)
Warning
!
- hot oil
Compressor oil can be very hot, and there is a danger
of being scalded. Take all necessary care with this
work.
OIL-CHANGE INTERVALS
•
Mineral oil: every 500 operating hours
•
Synthetic oil: every 1,000 operating hours
•
Carry out an oil change at least once a year.
PROCEDURE
⇒
Oil quantity: see technical data.
⇒
Let off the used oil at normal operating tempera-
ture.
⇒
Close the oil outlet screw.
⇒
Fill the fresh oil in at the spout.
⇒
Dispose of the used oil in an environmentally
responsible manner.
O il o u t le t s c r e w
O il f illin g s p o u t
AIR SUCTION FILTER
CONTROL INTERVALS
State of soiled
suction air
heavy moderate
light
Control
daily
weekly
every 500
hours
PRESSURE SWITCH
Operating instructions for the pressure switch are
enclosed with it. Note the maximum values when
adjusting the pressure switch.
CYLINDER HEAD SEAL
After the first 100 operating hours, the bolts on the
cylinder head seal must be tightened.
TORQUE WRENCH SETTINGS
Bolt Maximum
torque
M 8
25 Nm
M 10
50 Nm
M 12
85 Nm
