Instruction Manual for Mobile Jacks
8
3
Transport, Installation, and Assembly
DANGER
Danger to life, risk of injury from improper transport
Always transport the lift with suitable hoists and transport equipment (for example fork lifts or
cranes).
Never loiter under raised loads.
Safety Notes
Hoist the lift only at pick-up points.
Transport the lift cylinder horizontally and with the controls at the top.
Secure moving and loose parts.
3.1
Prepare
Lifting
Cylinder
for
Operation
Junior Jack S3
A
B
Remove cover A.
Screw in silencer B.
Blitz 15/15
Blitz 15/15/15
Master Jack
The above-named lifts are supplied
ready for operation (including oil)
and can be used immediately.
3.2
Install and Assemble the Lift
WARNING
Risk of injury and material damage from a toppling lift
Install the lift only on level and solid ground with sufficient load carrying capacity.
Use lifts with under floor carriage only on parallel rails with sufficient load capacity.
Safety Notes
Use hoists only with rollers fitting the rails.
Use lifts with an inground carriage only in the workshop pit for which they have been
manufactured.
Always adjust the guide rollers E so that the carriage cannot leave the rails.
There are three carriage types:
Carriage R (rail carriage)
Carriage M (free floor-running carriage)
Carriage X (free floor-running carriage), does not have to be disassembled
Summary of Contents for Junior Jack 0
Page 2: ......
Page 20: ...Instruction Manual for Mobile Jacks 20 ...
