BlitzRCWorks A-1 Skyraider, Instruction Manual

10

Problem

Cause

Solution

Motor does not run

1. Battery is not fully charged. 
2. The battery of transmitter is 

not sufficient

3. Check the wire connection 

inside the model

4. The motor do not work due to 

impact or damage. 

5. The frequency binding of the 

radio system fails

4. Change a new motor

No reaction for the 

control surface

1. 

2.The servo is damaged

1. Check the connection of 

2.Change another servo.

Can not fly straight

1.The rudder is not in the center 

position of the airframe

2.The main wing is not fixed in 

the center position of the airframe.

1. Adjust the trim switch on 

the transmitter

2.Re-assembly the main wing

Can not climb

1. The battery is not fully charged.

2. Two aileron are biased downward

1. Charger the battery

2. Adjust the inching switch on 

the Transmitter.

Limited control range

Install new batteries

Throttle

Troubleshooting

2. Install a new set of batteries

1. Charge the batter

y

.  

3. Please contact your local 

distributor

5. Please rebind the unit 

properly or inversely 

inserted

.

The servo 

wire was not inserted

the servo 

wir

e

The batteries are almost depleted.