BlitzRCWorks A-1 Skyraider, Instruction Manual

06

Assembly

rudder with screws

elevator with screws

aileron with screws

in the fixed position on 

and wheel cover on the 

wheel cover with screws

landing gear plastic.

the main wing.

wires of aileron and flap.

the servo arm.

and flap servos.

and flap then buckle them into  
the horn.

13. Insert the wing rod into 

4. Connect the wires of 

5. Install the landing gear 

6. Install the fixed holder

7. Fix the holder and 

8. Tie the soft wire to the 

10. Install the push rod for aileron 

1. Install the horn on                 2. Install the horn on                   3. Install the horns on 

11. Adjust the clevis of aileron 

12. Glue the missiles and tanks onto the main wing.

14. Connect the extension 

wire of landing gear.                     of tail landing gear with 

15. Connect the extension           16. Connect the steel wire 

9. Bind the soft wire and wheel cover.

17. Crimp the line with pliers.

landing gear.

the wing.

electric retracts.

(PB2.0X30mm 4pcs).                 (PB2.0X15mm 4pcs).                    (PB2.0X15mm 8pcs).

(PA2.6X20mm 8pcs).