background image

Page 3

Blockhead™ Z9 Manual Rev. A  

 

 

© 2016 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box? 

•  1 x Blockhead™ Z9 Moving Head

•  An Ever-So-Handy Power Cord

•  A Sweet Mounting Bracket

•  This Lovely User Manual

Getting It Out Of The Box 

Congratulations! You have just purchased a the coolest quad-color RGBW 3x3 pixel matrix 

moving head fixture on the market with infinite pan, infinite tilt, and infinite awesomeness!  

Now that you’ve got your Blockhead™ Z9, you should carefully unpack the box and check 

the contents to ensure that all parts are present and in good condition. If anything looks 

as if it has been damaged in transit, notify the shipper immediately and keep the packing 

material for inspection.  Again, please save the carton and all packing materials. If a fixture 

must be returned to the factory, it is important that the fixture be returned in the original 

factory box and packing.

Powering Up! 

All fixtures must be powered directly off a switched circuit and 

cannot be run off a 

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer 

channel is used solely for a 0% to 100% switch

.  

AC Voltage Switch -

 Not all fixtures have a voltage select switch, so please verify that the 

fixture you receive is suitable for your local power supply.  See the label on the fixture or 

refer to the fixture’s specifications chart for more information.  A fixture’s listed current 

rating is its average current draw under normal conditions. Check the fixture or device 

carefully to make sure that if a voltage selection switch exists that it is set to the correct 

line voltage you will use.

 

Warning! 

Verify that the voltage select switch on your unit matches the line 

voltage applied. Damage to your fixture may result if the line voltage applied does 

not match the voltage indicated on the voltage selector switch. All fixtures must 

be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something happens goes wrong, please visit www.blizzardlighting.com/support and 

open a support ticket.  We’ll be happy to help, honest. 

 

Blizzard Lighting

N24 W23750 Watertown Rd. Suite B

Waukesha, WI 53188 USA

www.blizzardlighting.com

Disclaimer:

 The information and specifications contained in this document are subject 

to change without notice. Blizzard Lighting™ assumes no responsibility or liability for any 

errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the 

right to update the existing document or to create a new document to correct any errors 

or omissions at any time. You can download the latest version of this document from www.

blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Thomas

3/29/2016

J. Thomas

3/29/2016

Summary of Contents for Blockhead Z9

























Reviews: