9/16"
7/16"
1
2
3
4
7/16"
9/16"
Moldboard & A-frame Assembly (Continued)
07
Male O.R.B. Connector Adapter
(Port #2)
S6
S8
S4
RV
FC
S3
S5
Hydraulic Hose Identification Guide
Straight Blade Snowplows
Calumet, Michigan 49913
HYDRAULIC HOSES
1
2
3
Port
Function
S3
S4
S5
S6
S5 & S8
BLZ 1054
NOTE: Energize the following
solenoids for the functions:
1
2
3
4
Pressure Gauge
Quick Connect
Clockwise - Decreases Plow Drop Speed
Counterclockwise - Increases Plow Drop Speed
4
Right Angle - Left Cylinder
Left Angle - Right Cylinder
Raise - Lift Cylinder (Base)
Lower - Lift Cylinder (Rod)
Angle Relief Valve
Variable Flow Control Valve
RV
FC
Left Angle - Right Cylinder
Right Angle - Left Cylinder
Float
Raise - Lift Cylinder (Base)
Lower - Lift Cylinder (Rod)
8.
Next, align the mount holes on the pump and the manifold with the
holes in the brackets located on the A-frame. When installed correctly,
the manifold will be located at the front of the A-frame closest to the
pivot beam.
CAUTION: When installing the manifold between the mount
brackets on the A-frame, hold the manifold at the sides of
the block. Never handle the manifold by the wire lead coils.
Doing so can cause a solenoid cartridge to bend, causing
the cartridge to stick when activated.
When installing the manifold between the mount
brackets on the A-frame, DO NOT handle the
manifold by the wire lead coils. The solenoid
cartridges can bend, causing them to stick when
activated. Always carry the manifold by the sides
of the aluminum block.
Installing The Manifold Adapters
There are a total of 4 hydraulic adapters to install.
All of the adapters can be found packaged with
the manifold assembly. Remove the protective
stretch wrap from the manifold in a clean area.
DO NOT let any foreign objects enter into the
open ports. The valves can become contaminated
and greatly hinder the plow’s performance.
Review the table on page 33 for proper torque
specifications.
Note: The gray arrows shown in the manifold illustration above indicate
the direction the 90˚ adapters should face to receive the hydraulic hoses.
90˚ Adjustable Elbow O.R.B. Adapter
(Ports #1, #3 & #4)
Summary of Contents for 680LT
Page 17: ...Notes 15 Notes...
