Page 11
Flurry™ 5 User Manual Rev. A
(c) 2013 Blizzard Lighting, LLC
Control Panel Menu Structure
**HOLD The <MENU> Button for 5 seconds to confirm any function. **
Display
Selection
Function
Addr
A001
-
A512
Sets the fixture DMX Address & Sets
the fixture to DMX Mode.
ChNd
8Ch
-
13Ch
Sets the fixture in 8 (Basic) or 13 (Ex
-
tended) DMX channel mode.
SLNd
NAST
-
SL 1
-
SL 2
Sets the fixture’s profile as Master
(NAST), Slave Mode 1 (SL 1), or Slave
Mode 2 (SL 2).
SouN
0 - 100
Sets the fixture in Sound Active mode,
and sets the sound sensitivity of the
unit’s internal microphone.
AuTo
No - YES
Sets the fixture in Auto Run mode.
STbY
No - YES
Sets the unit to enter “Standby Mode”
when not receiving DMX signal, other-
wise the unit will automatically enter
Master/Slave Mode.
PAN
No - YES
Sets the pan function to normal (NO) or
inverse (YES).
TILT
No - YES
Sets the tilt function to normal (NO) or
inverse (YES).
dISP
dSIP
Sets the display to normal or inverted.
TEST
<ENTER>
Sets the fixture in internal test mode.
hour
<ENTER>
Displays the fixture’s total running
hours.
rSET
<ENTER>
Resets the fixture.
BALA
rEd - GrEE - bLuE -
Anbr - UhIT
Adjusts the color balance of each color
between 0 (lowest) and 255 (highest)
NOTE:
Color balance adjustment is accessed by holding the
<ENTER>
button
for 5 seconds while in any operating mode.
