8
the fan controller's disconnect (L1,L2/N, L3). Wait 3 minutes for capacitors to discharge
to safe voltage levels (note: darkened display LEDs are not an indication of safe voltage
levels). Failure to do so may result in personal injury or death.
CAUTION：
Exercise caution and common sense when powering the fan. Do not connect
the fan to a damaged or hazardous power source. Do not attempt to resolve
electrical malfunctions or failures on your own. Contact BloBlades at
833-Blo-Fans
if you have any questions regarding the electrical
installation
of
this fan.
2.2 A scissor lift or movable scaffolds for lifting weight of the fan and at least two
installation personnel will be required, please check and confirm its safety &
reliability,
and each person installing the fans on the site must use a helmet and safety
harness at all
times.
BloBlades Fans must be installed with the BloBlades supplied controllers which are
suitable with this model. Other parts or controllers cannot be substituted.
CAUTION:
When service or replacement of a component in the fan requires the removal
or disconnection of a safety device, the safety device is to be reinstalled or
remounted as previously installed.
2.3 WARNING
—TO
REDUCE
THE
RISK
OF
FIRE,
ELECTRIC
SHOCK,
OR
INJURY
TO PERSONS, OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.
b)
Before servicing or cleaning unit, switch power off at service panel and lock the
service disconnect to prevent power from being switched on accidentally. When
the
service disconnect cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
CAUTION:
Do not bend the blades when installing, adjusting, or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
CAUTION:
The Bloblades Fans product warranty will not cover equipment damage or
failure that is caused by improper installation.
