40
First operating and installation
After you have safely installed your device and have carried out all the wirings, you can now turn your Aurora
on using the power switch on the back of the device. Please keep your password (WEP or WPA) and if neces-
sary your network identifier (SSID) ready for WLAN installation.
After turning on the Aurora, it starts with the setup wizard. If it does not start automatically, please press the
„ Menu“ button longer on the remote control and select „System Settings / Setup Wizard“ with the arrow
keys on your remote control.
1. Start the Aurora and confirm the privacy policy.
1.1 Please confirm the question after starting the setup wizard with Yes, press the arrow buttons on the
remote control until „Yes“ lights up and confirm with the „OK“ button.
2. Choose your desired time format, either 12 h or 24 h and confirm with the „OK“ key.
3. In the next step select „Update from DAB +“ (recommended) and confirm it. Your Aurora will automati
cally acquires its information about the time and date at every start.
4. Now select the desired time zone (Germany: UTC +01: 00). Confirm for daylight saving time.
5. In the following request „Connection received?“ you should confirm with „Yes“ to avoid interception and
streaming problems. If you won‘t use the internet please select „No“.
6. Now the device starts searching for WLAN and shows all WLAN networks (SSID) in your surroundings.
Select your wireless network. If your WLAN does not appear, this could be due to the following reasons:
- WLAN signal too weak at the installation location (if necessary, align the antennas on the router and
the Aurora differently or use a WLAN repeater).
- To suppress WLAN SSID on the router, select to OK Manual configuration.
7. If your router supports WPS, select OK, and then press the corresponding key on the router.
Alternatively, you can also select Skip WPS and then OK your network password (WEP or WPA). In
either case, both devices should be connected.
Summary of Contents for AURORA
