46
47
The DAB + radio
Press the „Mode“ button on the remote control or on the device and select the DAB + radio in the Menu using
the arrow keys or the multifunction knob.
First setup:
1.
An automatic search starts. After conclusion of the search all found stations would be shown as a list on the
display.
2.
To select the desired station, use the arrow keys on the remote control and confirm with the „Enter“ key. If
you want to save this station as favourite, then press one of the keys on the numeric keypad until the message
Saved appears on the display. During operation, you can now call up this station on the numeric keypad of the
remote control. In this way, you can overstore once occupied station memories with new stations at any time.
Press the „left arrow“ button on the remote control to return to the list.
3.
Repeat steps 1-2 until you have saved all desired stations.
You can save up to 10 stations as favourites.
4
. Please use the small reception quality symbol in the lower right corner of the display to optimally align your
antenna.
In daily operation:
1.
Start the DAB + radio as described above.
2.
The number pad of your remote control allows you to retrieve your stored stations at any time. The respec-
tive station memory location is shown at the bottom of the display. Briefly press the „P“ button on the remote
control or on the unit to display a list of all stored stations.
3.
The DAB + Radio dispose of digital text functions which are shown on the display. By pressing the „Info“ but-
ton on your remote control once or several times, you can, depending on the station, call up further informati-
on; with the „Enter“ button you can switch the cover presentation to full screen.
4.
Press the „left arrow“ key on the remote control to return to the station list.
5.
By pressing the „left arrow“ key twice on the remote control, you can call up further settings on the device.
The function DRC is irrelevant in Germany, as the DAB + stations do not support this operation. The function
„Clean channels“ doesn’t remove receivable stations, e.g. after a processing.
6.
Use the „Forward“ and „Backward“ buttons on the remote control or the unit to switch to the next or previ-
ous station within the bouquet.
