Block V 100, Instruction Manual

REAR  PANEL CONNECTIONS

P17

1.  POWER SWITCH: Switches mains power on/off to internal 
     components,   however please note that mains power is still
     applied to this unit even though  this switch may be off.

2.  FUSE HOLDER:  fitted  with  20mm T 2A fuse inside.

" IMPORTANT:"

     Remove the mains plug from the mains socket before  attempting 
     to check/ replace  the fuse located  on  this fuse holder.  

3. 

MAINS CABLE INLET JACK:  Please ensure that the input  cable strain relief

     bush is  intact  and has not  been damaged.

4. 

WARNING ICONS:  Please be aware that this unit contains high voltages,

     and should not be opened,  please refer to page 2 of this manual.

5/6. 

LOUDSPEAKER OUTPUTS. Please ensure that +/- connections are made

        properly between rear of the amplifier and loudspeakers. Ensure wires are
        not  frayed or touching.

7.  

LINE OUTPUT SOCKETS:  This is for connection to external amplification or 

      recording  equipement.

8.  TV  INPUT SOCKET.
     
9. TAPE INPUT SOCKET.

10. AUX INPUT SOCKET.

11. TUNER  INPUT SOCKET.

12. CD INPUT SOCKET.

13. PHONO  INPUT SOCKET. (For the connection of a turntable)

14. 

PHONO TERMINAL EARTH POST. It is necessary to provide a chassis

       earth connection between the turntable and the amplifier. Failure to do 
       this  will result in a buzzing or humming noise from the loudspeakers.

-

+

-

+