Operation
17
Optional Cook & Hold
1
4
2
3
13
5
15
14
16
17
6
9
12
7
8
10
11
Figure 13
CONTROLS IDENTIFICATION
1.
LOW WATER FILL LIGHT
--- when lit indicates
low water level in the steam generator.
2.
DON’T STEAM LIGHT
--- when lit indicates
the unit is too hot to operate in the steam
mode.
3.
POWER ON LIGHT
--- when lit indicates pow-
er to the unit is turned on.
4.
MODE SELECTOR SWITCH
--- controls pow-
er to the oven and selection of steam, hot air
and combi modes. The convection fan runs
with the switch in steam, hot air, combi or cool
down.
5.
TIME DISPLAY
--- gives cook time.
6.
TIME ARROW KEYS
--- press to enter cook
time from 00:00 to 99:59.
7.
TEMPERATURE DISPLAY
--- gives cook tem-
perature.
8.
HEAT LIGHT
--- when lit indicates hot air or
steam is in operation.
9.
TEMPERATURE ARROW KEYS
--- press to
enter cook temperature from 120---212
_
F
(48---100
_
C) for steam and 140---500
_
F
(60---260
_
C) for hot air/combi.
10.
STAGE ONE LED
--- when lit indicates opera-
tion or programming of stage one for the cur-
rent product. Cook cycles may contain one or
two different stages.
11.
ACTUAL TEMP KEY
--- press to display actual
oven/steamer temperature
12.
STAGE TWO KEY
--- press to enter stage two
cook time and temperature.
13.
PRODUCT KEYS
--- three programmable keys.
14.
MANUAL PRODUCT KEY
--- default product
key used for manual and programmed cooking.
15.
START KEY
--- press to begin a cook cycle.
16.
STOP KEY
--- press to silence audible alarms
and pause or cancel cook cycles.
17.
PROGRAM KEY
--- press to enter program-
ming mode and save programmed settings.
18.
FLUSH/DRAIN SWITCH
--- Used to flush/
drain the steam generator for decalcification.
