Blodgett Mark V Installation Manual Download

Page: 23 / 40

Operation

Blodgett IQ2

Control

Programming the Shelf ID:

The Shelf ID option can be turned on or off for spe-

cific product keys.

NOTE: Shelf ID is not allowed with multiple stage

recipes.

1. The top display reads

SHLF

. The bottom dis-

play reads the current shelf ID mode. Press

the TOGGLE/CLEAR KEY (11) to toggle be-

tween yes and no. Press the SCAN KEY (15)

to advance the programming mode to timing.

Programming the Timing Mode:

There are 3 options for timing mode: Straight, Flex

and Sensitivity.
1. The top display reads

tC---1

. The bottom dis-

play gives the current timing mode. Press the

TOGGLE/CLEAR KEY (11) to toggle between

and

ns.

NOTE: Sensitivity adjusts the cook time to

compensate for any difference be-

tween the setpoint and actual temper-

ature. The lower the sensitivity value

the shorter the time adjustment. Sensi-

tivity values are set in the manager lev-

el programming.

If Shelf ID is activated, all three timing modes

are available. If Shelf ID is not activated, only

straight or flex timing modes are available.

2. Press the SCAN KEY (15) to advance the pro-

gramming mode to hold mode.

Programming Hold Mode:

The hold mode can be toggled on or off for specific

product keys.
1. The top display reads

HOLD

. The bottom dis-

play reads the current hold mode. Press

TOGGLE/CLEAR KEY (11) to toggle between

on and off. Press the SCAN KEY (15).

2. If the hold mode is activated, the bottom dis-

play give the current hold time. Press the

TOGGLE/CLEAR KEY (11). Use the product

keys to enter the new hold time. Press the

SCAN KEY (15).

3. The bottom display gives the current hold

temperature. Press the TOGGLE/CLEAR KEY

(11). Use the product keys to enter the new

hold temperature from 140-210

F (60-99

C).

Press the SCAN KEY (15).

4. The top display reads

HFAN

(hold fan speed).

The bottom display gives the current hold fan

speed setting. Press the TOGGLE/CLEAR

KEY (11) to toggle between high and low.

Press the SCAN KEY (15) to exit the hold

mode programming.

Check all Settings (SEE Mode):

The SEE mode allows the operator to scroll through

and view settings of a particular product key.
1. Press the PROG KEY (10). The top display

reads

Code

2. Use the product keys to enter the SEE access

code: 2 4 4 4. Press the ENTER KEY (14). The

Summary of Contents for Mark V









































Search results

Summary of Contents for Mark V

Reviews:

Related manuals for Mark V

Brands by name

Popular brands

Blodgett Mark V, Installation Manual

Search results

Summary of Contents for Mark V

Reviews:

Related manuals for Mark V

Brands by name

Popular brands