Instruction Manual
GB
9
REPOSITIONING THE DOORS
(Fig. 9)
1-
Switch off at the socket outlet and pull out the mains plug.
2-
Remove all food, loose items and fittings from the appliance and door shelves.
3-
Unscrew the bolts and remove the middle hinge while holding doors.
(1)
4-
Remove the freezer compartment door from the top hinge by sliding down and
pulling front.
(2)
5-
Remove the fresh food compartment door by pulling up.
(3)
6-
Remove the plastic covers on the front top trim.
(4)
7-
Unscrew the bolts of the top hinge and remove top hinge.
(5)
8-
Reposition plugs on the opposite side.
(6)
9-
Carefully lay the appliance on its back.
(7)
(You may need somebody to help you.)
10-
Unscrew and remove the left hand side front feet.
(8)
11-
Unscrew and remove the bottom hinge.
(9)
12-
Reposition the plastic covers on top of fresh food door to the opposite
side.
(10)
13-
Unscrew and remove the middle hinge bushing from freezer door.
(11)
14-
Screw and fix the new middle hinge bushing which is supplied in IB bag to
the other side.
(12)
15-
Reposition the hinge bushing and the tap on the fresh food door.
(13)
16-
Unscrew and reposition the bottom hinge bushing.
(14)
17-
Fit the bottom hinge, if necessary adjust and tighten the bolts
(15)
18-
Fit the other feet and tighten the screws.
(16)
19-
Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the
opposite side.
(17)
20-
Fit the top hinge and tighten the bolts.
(18)
21-
Fit the plastic cover on the front top trim.
(19)
22-
Locate the fresh food door to the bottom hinge and attach to the cabinet.
(20)
23-
Locate the middle hinge on the fresh food door
(21)
and put the freezer door
between the top and middle hinge carefully.
(22)
24-
Fit the middle hinge. Adjust the doors and tighten the bolts.
(23)
25-
Carefully stand your appliance (you may need somebody to help you) adjust
the front feet.
26-
Remove the plastic plugs on the doors. Unscrew the door handles. Reposition
the door handles on the other side. Tighten the screws and fit the plastic
plugs.
(24)
27-
Put back all, loose items and fittings.
28-
Wait for at least 4 hours to allow the system to settle before switching on.