Instruction Manual
GB
9
Repositioning the doors
(Fig. 7)
1-
Switch off at the socket outlet and pull out the mains plug.
2-
Remove all food, loose items and fittings from the appliance and door shelves.
3-
Unscrew the bolts and remove the middle hinge while holding doors. (
1)
4-
Remove the fresh food compartment door from the top hinge by sliding down
and pulling front. (
2)
5-
Remove the freezer compartment door by pulling up. (
3)
6-
Remove the plastic covers on the front top trim. (
4)
7-
Unscrew the bolts of the top hinge and remove top hinge. (
5)
8-
Reposition plugs on the opposite side. (
6)
9-
Remove the front bottom trim. (
7)
10-
Carefully lay the appliance on its back. (
8)
(You may need somebody to help you.)
11-
Unscrew and remove the left hand side front feet. (
9)
12-
Unscrew and remove the bottom hinge. (
10)
13-
Reposition the plastic covers on top of fresh food door to the opposite
side.
(
11)
14-
Unscrew and remove the middle hinge bushing from fresh food door. (
12)
15-
Screw and fix the new middle hinge bushing which is supplied in IB bag to
the other side.(
13)
16-
Reposition the hinge bushing and the tap on the freezer door. (
14)
17-
Unscrew and reposition the bottom hinge bushing. (
15)
18-
Unscrew bolt of the pin on the bottom hinge. Fit the pin to the other hole on
the hinge and tighten the bolt on the new position. (
16)
19-
Fit the bottom hinge and other feet, and tighten the screws. (
17)
20-
Remove the plastic tap to the opposite side on the front bottom trim. (
18)
21-
Fit the front bottom trim to the bottom hinge and other feet. (
19)
22-
Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the
opposite side. (
20)
23-
Fit the top hinge and tighten the bolts. (
21)
24-
Fit the plastic cover on the front top trim. (
22)
25-
Locate the freezer door to the bottom hinge and attach to the cabinet. (
23)
26-
Locate the middle hinge on the freezer door (
24)
and put the fresh food
between the top and middle hinge carefully. (
25)
27-
Fit the middle hinge. Adjust the doors and tighten the bolts. (
26)
28-
Carefully stand your appliance (you may need somebody to help you) adjust
the front feet.
29-
Remove the plastic plugs on the doors. Unscrew the door handles. Reposition
the door handles on the other side. Tighten the screws and fit the plastic
plugs. (
27)
30-
Put back all, loose items and fittings.
31-
Wait for at least 4 hours to allow the system to settle before switching on.
Summary of Contents for KSM 1640
