•
The timer can be set by pressing down the PLUS or MINUS buttons or by pressing down
further (with sound signal).
After the timer has been set, countdown begins. When time is up, a sound signal is given off and the
display flashes.
The sound signal will stop:
•
Automatically after 2 minutes.
•
By pressing any button.
The display stops flashing and switches off.
Switching off / altering the timer
•
The timer can be altered or switched off at any moment by pressing the PLUS and MINUS
buttons (with sound signal). The timer switches off and clears the time to “0” by pressing the
MINUS button or by pressing the PLUS and MINUS buttons at the same time, which directly
clears the timer to “0” before switching off.
•
If the touch control is switched on (using the power button), the autonomous timer switches
off.
Setting the timer for the cooking zones
It is possible to set a separate timer for each cooking zone by switching on the touch control.
•
By selecting the cooking zone using the zone selection button, setting the power level and
then pressing the timer button, it is possible to set a countdown to switch off the cooking
zone.
The number of indicator lights positioned around the timer display corresponds to the number
of cooking zones to indicate which zones have been activated by the timer.
•
When the timer is selected, its display flashes, and the indicator lights around the display
lights up. If a cooking zone is selected, the timer indicator lights switches off and the display
no longer flashes.
•
When altering the selection of a cooking zone, the timer display indicates the timer value
corresponding to the newly selected cooking zone. The timers set for each cooking zone
remain activated.
•
Other timer functions are the same as for the autonomous timer. The PLUS button must be
pressed to increase the value of the corresponding cooking zone.
10
Summary of Contents for MKL 5460
