7
AQM Series
Instruction Manual
Section 3 -The AQM Unit
Front Panel
UP
DN
L
R
ENTER
AQM
1
2
1.
LCD Display -
2-line Liquid
Crystal Display screen for
displaying unit information.
2.
Navigation Keypad -
Buttons used to navigate
between menus and enter
unit information.
1.
Power -
3-pin female connector
to receive power cable from the
MIPS-12 power supply.
2.
ASI IN
- BNC connector for ASI
(Asynchronous Serial Interface)
input.
3.
RF OUT -
75 ohm QAM
rF output.
Rear Panel
AGILE QAM
MODULATOR
MODEL:
AQM
STOCK NO.
6271B
RF
OUT
ASI
IN
+5V
+12V
GND
P
O
W
E
R
2
1
3
MIPS-12
POWER SUPPLY
STOCK NO. 7722C
POWER
UP
DN
L
R
ENTER
AQM
UP
DN
L
R
ENTER
AQM
UP
DN
L
R
ENTER
AQM
UP
DN
L
R
ENTER
AQM
UP
DN
L
R
ENTER
AQM
UP
DN
L
R
ENTER
AQM
MIRC-12v Chassis with MIPS-12C Power Supply
MIPS-12C Power Supply Connections
All the connectors on the power supply are located on the rear panel.
1
2
1.
AC Input
- The power supply is available in 110 VAC/60 Hz and 220 VAC/50 Hz models.
2.
DC Output
- The polarized D connector provides 12 sets of +12 Vdc, +5 Vdc and ground cables
for the modules. 12 sets is only required if analog modulators are used within the rack.
Drawings are for illustration purposes only and are not to scale
3.1 Micro-Modulator Rack Chassis and Power Supply Units
