background image

One Jake Brown Road 

Old Bridge, NJ 08857-1000 USA 

(800) 523-6049 • (732) 679-4000 • FAX: (732) 679-4353 

www.blondertongue.com

Limited Warranty

Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may 

determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to meet the specifications which 

are in effect on the date of shipment or such other specifications as may have been expressly agreed upon in writing (i) for a period of one (1) 

year from the date of original purchase (or such shorter period of time as may be set forth in the license agreement specific to the particular 

software being licensed), with respect to iCentral™ (hardware and software) and all other software products (including embedded software) 

licensed from BT, (ii)) for a period of one (1) year from the date of original purchase, with respect to all MegaPort, IPTV products and fiber 

optics receivers, transmitters, couplers and integrated receivers/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™ and TWIN 

STAR™ products) as well as for VideoCipher® & DigiCipher® satellite receivers, and (iii) for a period of three (3) years from the date of original 

purchase, with respect to all other BT products. Notwithstanding the foregoing, in some cases, the warranty on certain proprietary sub-assembly 

modules manufactured by third party vendors and contained in BT products and on certain private-label products manufactured by third parties 

for resale by BT are of shorter duration or otherwise more limited than the standard BT limited warranty. In such cases, BT’s warranty with 

respect to such third party proprietary sub-assembly modules and private-label products will be limited to the duration and other terms of such 

third party vendor’s warranty. In addition, certain products, that are not manufactured but are resold by BT, carry the original OEM warranty for 

that product. The limited warranty set forth in this paragraph does not apply to any product sold by BT, which at the time of sale constituted a 

Closeout Product. 

BT will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may determine) any product sold by 

BT which at the time of sale constituted a refurbished or closeout items (“Refurbished Product” and “Closeout Product”), which proves to be 

defective in materials or workmanship or fails to meet the specifications which are in effect on the date of shipment or such other specifications 

as may have been expressly agreed upon in writing, for a period of ninety (90) days from the date of original purchase. Notwithstanding the 

foregoing, in some cases, the warranty on third party software and on certain proprietary sub-assembly modules manufactured by third party 

vendors and contained in BT products and on certain private-label products manufactured by third parties for resale by BT are of shorter 

duration or otherwise more limited than the BT limited warranty for Closeout Products. In such cases, BT’s warranty for Closeout Products 

constituting such third party software, third party proprietary sub-assembly modules and private-label products will be limited to the duration 

and other terms of such third party vendor’s warranty. In addition, notwithstanding the foregoing, (i) certain Closeout Products that are not 

manufactured (but are resold) by BT, carry the original OEM warranty for such products, which may be longer or shorter than the BT limited 

warranty for Refurbished or Closeout Products. All sales of Refurbished or Closeout Products are final.

To obtain service under this warranty, the defective product, together with a copy of the sales receipt or other satisfactory proof of purchase 

and a brief description of the defect, must be shipped freight prepaid to: Blonder Tongue Laboratories, Inc., One Jake Brown Road, Old Bridge, 

New Jersey 08857.

This warranty does not cover damage resulting from (i) use or installation other than in strict accordance with manufacturer’s written instructions, 

(ii) disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair center, (iii) misuse, misapplication or 

abuse, (iv) alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain, lightning, or any other weather conditions or acts of God.

OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF 

ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE, MER-

CHANTABILITY OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE ANY ORAL OR WRITTEN WAR-

RANTIES OR REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S EMPLOYEES OR REPRESENTATIVES, OR 

IN ANY OF BT’S BROCHURES, MANUALS, CATALOGS, LITERATURE OR OTHER MATERIALS. IN ALL CASES, BUYER’S SOLE 

AND EXCLUSIVE REMEDY AND BT’S SOLE OBLIGATION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN 

SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING POINT, AS BT IN 

ITS SOLE DISCRETION SHALL DETERMINE. BT SHALL IN NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR 

RESPONSIBLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, PUNITIVE, DIRECT OR SPECIAL DAMAGES BASED 

UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE OR ANY 

OTHER LEGAL THEORY ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE, INSTALLATION OR FAILURE OF ANY 

PRODUCT ACQUIRED BY BUYER FROM BT.

All claims for shortages, defects and non-conforming goods must be made by Buyer in writing within five (5) days of receipt of merchandise, 

which writing shall state with particularity all material facts, concerning the claim then known to Buyer. Upon any such complaint, Buyer shall 

hold the goods complained of intact and duly protected, for a period of up to sixty (60) days. Upon the request of BT, Buyer shall ship such 

allegedly nonconforming or defective goods, freight prepaid to BT for examination by BT’s inspection department and verification of the defect. 

BT, at its option, will either repair, replace or issue a credit for products determined to be defective. BT’s liability and responsibility for defective 

products is specifically limited to the defective item or to credit towards the original billing. All such replacements by BT shall be made free 

of charge f.o.b. the delivery point called for in the original order. Products for which replacement has been made under the provisions of this 

clause shall become the property of BT. Under no circumstances are products to be returned to BT without BT’s prior written authorization. BT 

reserves the right to scrap any unauthorized returns on a no-credit basis. Any actions for breach of this contract must be commenced by Buyer 

within thirteen (13) months after the cause of action has accrued. A copy of BT’s standard terms and conditions of sale, including the limited 

warranty, is available from BT upon request. Copies of the limited warranties covering third party proprietary sub-assembly modules and private 

label products manufactured by third parties are also available from BT on request. VideoCipher® & DigiCipher® are registered trademarks of 

Motorola Corp.

Summary of Contents for AMCM-860B

























Reviews: