4 Clearview NTSC16
Quick Guide
This section provides status messages, temperatures, and fan RPM for the Host system as well as each decoder used.
The page also features a recent logged message box beneath the main status area which shows the 10 most recent entries
within the Event Log. To see a more in-depth log of event messages, click the “
Log
” tab located on the right side of the
navigation menu at the top.
Step 4: Basic Configuration
System Status
Once you are logged into the unit, you will be presented with the “
System Status
” page (“Status” tab):
Status Page - Full View
Step 3: Login to the Controller
An Ethernet Cable should be connected between your PC and the “
Control
” port
on the unit. Open a Web browser (Chrome or Firefox recommended) and type
http://172.16.70.1
in to your web browser to view and configure your Clearview
NTSC16. Enter the username “
Admin
” and “
pass
” as the password and click [LOG IN].