21
FlexCoder
Instruction Manual
MAC Address - Remote Control
: indicates the MAC Address of the “100/1000 Control” Port.
MAC Address - Data
: indicates the MAC Address of the Data Port.
Software Version
: indicates the software version of the unit.
FPGA Version:
indicates the current hardware version of the unit’s FPGA chipset.
QAM Output Version:
indicates the current software version of the unit’s Quad-QAM output module.
Hardware Version:
indicates the unit’s hardware version.
Serial Number:
indicates the unit’s serial number.
Headend Name:
allows user to enter a headend name to make identification easier.
Location:
allows user to enter a location name to make identification easier.
Login Timeout (Minutes):
indicates the period of time before the unit logs itself out if there is no activity on the
web screens. Options are 5, 15, 30, or 60 minutes.
Remote Control IP Address:
the static IP address that is assigned to the Control 100/1000 Port. It allows the user to
access the unit via the web interface. (Factory Default: 172.16.70.1)
Remote Control Subnet Mask:
the Subnet Mask assigned to the Control Port of the unit. It allows the user
to determine which subnet the Control Port IP address belongs to. (Factory Default: 255.255.255.0)
Remote Control Default Gateway:
the gateway address assigned to the Control Port. It allows the user to access
the unit from another network via the web interface. (Factory Default: 172.16.70.254)
Data IP Address:
the static IP address that is assigned to the Data Port.
Data Subnet Mask:
the Subnet Mask assigned to the Data Port of the unit.
Data Default Gateway:
the gateway address assigned to the Data Port.
Log Destination IP:
is the IP address of the remote server, to which Syslog sends the activities recorded by 4K
Modulator for monitoring and troubleshooting purposes. (Factory Default: 172.16.70.2)
Log Destination Port:
is the Event Log Destination port to which a duplicate of the error messages created by
the unit can be forwarded for monitoring and troubleshooting purposes. (Factory Default: 514, cannot be changed)
Active Users:
displays current login names & IP addresses
1
2
3
4
5
6
7
8
9
10
4.9 “Network” Screen (continued)
11
12
13
14
15
16
17
18
19
Remember
to
click
on
the
SAVE
button
to
apply
the
new
values/configurations.
