background image

Limited Warranty

Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, 

as BT may determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to 

meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly 

agreed upon in writing (i) for a period of one (1) year from the date of original purchase (or such shorter period of time as may 

be set forth in the license agreement specific to the particular software being licensed), with respect to iCentral™ (hardware and 

software) and all other software products (including embedded software) licensed from BT, (ii)) for a period of one (1) year from 

the date of original purchase, with respect to all MegaPort, IPTV products and fiber optics receivers, transmitters, couplers and 

integrated receivers/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™ and TWIN STAR™ products) as well as for 

VideoCipher® & DigiCipher® satellite receivers, and (iii) for a period of three (3) years from the date of original purchase, with 

respect to all other BT products. Notwithstanding the foregoing, in some cases, the warranty on certain proprietary sub-assembly 

modules manufactured by third party vendors and contained in BT products and on certain private-label products manufactured 

by third parties for resale by BT are of shorter duration or otherwise more limited than the standard BT limited warranty. In such 

cases, BT’s warranty with respect to such third party proprietary sub-assembly modules and private-label products will be limited 

to the duration and other terms of such third party vendor’s warranty. In addition, certain products, that are not manufactured 

but are resold by BT, carry the original OEM warranty for that product. The limited warranty set forth in this paragraph does not 

apply to any product sold by BT, which at the time of sale constituted a Closeout Product. 

BT will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may determine) any product 

sold by BT which at the time of sale constituted a refurbished or closeout items (“Refurbished Product” and “Closeout Product”), 

which proves to be defective in materials or workmanship or fails to meet the specifications which are in effect on the date of 

shipment or such other specifications as may have been expressly agreed upon in writing, for a period of ninety (90) days from 

the date of original purchase. Notwithstanding the foregoing, in some cases, the warranty on third party software and on certain 

proprietary sub-assembly modules manufactured by third party vendors and contained in BT products and on certain private-

label products manufactured by third parties for resale by BT are of shorter duration or otherwise more limited than the BT limited 

warranty for Closeout Products. In such cases, BT’s warranty for Closeout Products constituting such third party software, third 

party proprietary sub-assembly modules and private-label products will be limited to the duration and other terms of such third 

party vendor’s warranty. In addition, notwithstanding the foregoing, (i) certain Closeout Products that are not manufactured (but 

are resold) by BT, carry the original OEM warranty for such products, which may be longer or shorter than the BT limited warranty 

for Refurbished or Closeout Products. All sales of Refurbished or Closeout Products are final.

To obtain service under this warranty, the defective product, together with a copy of the sales receipt or other satisfactory proof 

of purchase and a brief description of the defect, must be shipped freight prepaid to: Blonder Tongue Laboratories, Inc., One Jake 

Brown Road, Old Bridge, New Jersey 08857.

This warranty does not cover damage resulting from (i) use or installation other than in strict accordance with manufacturer’s 

written instructions, (ii) disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair 

center, (iii) misuse, misapplication or abuse, (iv) alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain, lightning, or 

any other weather conditions or acts of God.

OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR REPRESENTA-

TIONS OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTIC-

ULAR PURPOSE, MERCHANTABILITY OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE 

ANY ORAL OR WRITTEN WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S 

EMPLOYEES OR REPRESENTATIVES, OR IN ANY OF BT’S BROCHURES, MANUALS, CATALOGS, LITERATURE 

OR OTHER MATERIALS. IN ALL CASES, BUYER’S SOLE AND EXCLUSIVE REMEDY AND BT’S SOLE OBLIGA-

TION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE REPAIR OR 

REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING POINT, AS BT IN ITS SOLE DISCRETION SHALL 

DETERMINE. BT SHALL IN NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR 

ANY  CONSEQUENTIAL,  INDIRECT,  INCIDENTAL,  PUNITIVE,  DIRECT  OR  SPECIAL  DAMAGES  BASED  UPON 

BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE OR 

ANY OTHER LEGAL THEORY ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE, INSTALLATION OR 

FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM BT.

All claims for shortages, defects and non-conforming goods must be made by Buyer in writing within five (5) days of receipt of 

merchandise, which writing shall state with particularity all material facts, concerning the claim then known to Buyer. Upon any 

such complaint, Buyer shall hold the goods complained of intact and duly protected, for a period of up to sixty (60) days. Upon 

the request of BT, Buyer shall ship such allegedly nonconforming or defective goods, freight prepaid to BT for examination by 

BT’s inspection department and verification of the defect. BT, at its option, will either repair, replace or issue a credit for products 

determined to be defective. BT’s liability and responsibility for defective products is specifically limited to the defective item or to 

credit towards the original billing. All such replacements by BT shall be made free of charge f.o.b. the delivery point called for in 

the original order. Products for which replacement has been made under the provisions of this clause shall become the property 

of BT. Under no circumstances are products to be returned to BT without BT’s prior written authorization. BT reserves the right 

to scrap any unauthorized returns on a no-credit basis. Any actions for breach of this contract must be commenced by Buyer 

within thirteen (13) months after the cause of action has accrued. A copy of BT’s standard terms and conditions of sale, including 

the limited warranty, is available from BT upon request. Copies of the limited warranties covering third party proprietary sub-

assembly modules and private label products manufactured by third parties are also available from BT on request. VideoCipher® 

& DigiCipher® are registered trademarks of Motorola Corp.

Rev 5/6/2009

Blonder Tongue Laboratories, Inc. 

 Limited Warranty

Blonder Tongue Laboratories, Inc. (BT) will at its sole option, either repair or replace (with a new or factory reconditioned product, as BT may 

determine) any product manufactured by BT which proves to be defective in materials or workmanship or fails to meet the specifications which are 

in effect on the date of shipment or such other specifications as may have been expressly agreed upon in writing (i) for a period of one (1) year from 

the date of original purchase (or such shorter period of time as may be set forth in the license agreement specific to the particular software being 

licensed), with respect to iCentral™ (hardware and software) and all other software products (including embedded software) licensed from BT, (ii) ) 

for a period of one (1) year from the date of original purchase, with respect to all MegaPort™, IPTV products, and fiber optics receivers, transmitters, 

couplers and integrated receiver/distribution amplifiers (including TRAILBLAZER™, RETRO-LINX™ and TWIN STAR™ products) as well as for 

DigiCipher ® satellite receivers, and (iii) for a period of three (3) years from the date of original purchase, with respect to all other BT products.  

Notwithstanding the foregoing, in some cases, the warranty on certain proprietary sub-assembly modules manufactured by third-party vendors and 

contained in BT products and on certain private–label products manufactured by third-parties for resale by BT are of shorter duration or otherwise 

more limited than the standard BT limited warranty. In such cases, BT's warranty with respect to such third-party proprietary sub-assembly modules 

and private-label products will be limited to the duration and other terms of such third-party vendor's warranty. In addition, certain products, that are 

not manufactured but are resold by BT, carry the original OEM warranty for such products. The limited warranty set forth in this paragraph does not 

apply to any product sold by BT, which at the time of sale constituted a Refurbished/Closeout Product. 

(b)  BT will at its sole option, either repair or replace (with a new or factory-reconditioned product, as BT may determine) any product sold by BT 

which at the time of sale constituted a refurbished or closeout item (“Refurbished/Closeout Product”), which proves to be defective in materials or 

workmanship or fails to meet the specifications which are in effect on the date of shipment or such other specifications as may have been expressly 

agreed upon in writing, for a period of ninety (90) days from the date of original purchase.  Notwithstanding the foregoing, in some cases the 

warranty on third party software and on certain proprietary sub-assembly modules manufactured by third-party vendors and contained in BT products 

and on certain private–label products manufactured by third-parties for resale by BT are of shorter duration or otherwise more limited than the BT 

limited warranty for Refurbished/Closeout Products.  In such cases, BT's warranty for Refurbished/Closeout Products constituting such third party 

software, third-party proprietary sub-assembly modules and private-label products will be limited to the duration and other terms of such third-party 

vendor's warranty.  In addition, notwithstanding the foregoing, (i) certain Refurbished/Closeout Products that are not manufactured (but are resold) 

by BT, carry the original OEM warranty for such products, which may be longer or shorter than the BT limited warranty for Refurbished/Closeout 

Products.  All sales of Refurbished/Closeout Products are final. 

To obtain service under this warranty, the defective product, together with a copy of the sales receipt or other satisfactory proof of purchase and a 

brief description of the defect, must be shipped freight prepaid to: Blonder Tongue Laboratories, Inc., One Jake Brown Road, Old Bridge, New 

Jersey 08857. 

This warranty does not cover damage resulting from (i) use or installation other than in strict accordance with manufacturer's written instructions, (ii) 

disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair center, (iii) misuse, misapplication or abuse, (iv) 

alteration, (v) lack of reasonable care or (vi) wind, ice, snow, rain, lightning, or any other weather conditions or acts of God.

OTHER THAN THE WARRANTIES SET FORTH ABOVE, BT MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF 

ANY KIND, EXPRESS OR IMPLIED, AS TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE, 

MERCHANTABILITY, OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES SUPERSEDE ANY ORAL OR WRITTEN 

WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY BT OR BY ANY OF BT’S EMPLOYEES OR 

REPRESENTATIVES, OR IN ANY OF BT’S BROCHURES MANUALS, CATALOGS, LITERATURE OR OTHER MATERIALS. IN 

ALL CASES, BUYER’S SOLE AND EXCLUSIVE REMEDY AND BT’S SOLE OBLIGATION FOR ANY BREACH OF THE 

WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE 

PRODUCT F.O.B. SHIPPING POINT, AS BT IN ITS SOLE DISCRETION SHALL DETERMINE. BT SHALL IN NO EVENT AND 

UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, 

PUNITIVE, DIRECT OR SPECIAL DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, 

STRICT TORT LIABILITY OR OTHERWISE OR ANY OTHER LEGAL THEORY, ARISING DIRECTLY OR INDIRECTLY FROM 

THE SALE, USE, INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM BT.  

All claims for shortages, defects, and non-conforming goods must be made by the customer in writing within five (5) days of receipt of merchandise, 

which writing shall state with particularity all material facts concerning the claim then known to the customer. Upon any such claim, the customer 

shall hold the goods complained of intact and duly protected, for a period of up to sixty (60) days. Upon the request of BT, the customer shall ship 

such allegedly non-conforming or defective goods, freight prepaid to BT for examination by BT's inspection department and verification of the 

defect. BT, at its option, will either repair, replace or issue a credit for products determined to be defective. BT's liability and responsibility for 

defective products is specifically limited to the defective item or to credit towards the original billing. All such replacements by BT shall be made 

free of charge f.o.b. the delivery point called for in the original order. Products for which replacement has been made under the provisions of this 

clause shall become the property of BT. Under no circumstances are products to be returned to BT without BT's prior written authorization. BT 

reserves the right to scrap any unauthorized returns on a no-credit basis. Any actions for breach of a contract of sale between BT and a customer must 

be commenced by the customer within thirteen (13) months after the cause of action has accrued. A copy of BT's standard terms and conditions of 

sale, including the limited warranty, is available from BT upon request. Copies of the limited warranties covering third-party proprietary sub-

assembly modules and private-label products manufactured by third-parties are also available from BT on request.  DigiCipher ® is a registered 

trademark of Motorola Corp. (

Rev 0509) 

Seller will at its sole option, either repair or replace (with a new or factory reconditioned product, as Seller may determin e) any product manufactured or sold (or in 
the case of software, licensed) by Seller which is defective in materials or workmanship or fails to meet the applicable specifications that are in effect on the date of 
shipment or such other specifications as may have been expressly agreed upon in writing: (i) for a period of three (3) years from the date of original purchase for all 
stock hardware products (other than those specifically referenced herein below having a shorter warranty period); (ii) for a  period of one (1) year from the date of 
original purchase, with respect to all MegaPort™, IPTV products, test equipment and fiber optics receivers, transmitters, couplers and integrated receiver/distribution 
amplifiers; (iii) for a period of one (1) year from the date of original purchase (or such shorter period of time as may be set forth in the license agreement specific to 
the particular software being licensed from Seller) with respect to all software products licensed from Seller (other than Core Product Software) that is (a) developed 
for a specific function or application, (b) complimentary to and does not function without the Core Product Software, and (c) listed with a specific model number and 
stock number in Seller’s Price List (“

Non-Core Software

”); (iv) for a period of ninety (90) days from the date of original purchase, with respect to non-serialized 

products and accessories, such as parts, sub-assemblies, splitters and  all other products sold by Seller (other than Core Product Software and Refurbished/Closeout 
Products) not otherwise referred to in clauses (i) through (iii) above.  The warranty period for computer programs in machine-readable form included in a hardware 
product, which are essential for the functionality thereof as specifically stated in the published product specifications (“

Core Product Software

”) will be coincident 

with the warranty period of the applicable hardware product within which such Core Product Software is installed.   

Software patches, bug fixes, updates or workarounds do not extend the original warranty period of any Core Product Software or Non-Core Software.  

Notwithstanding anything herein to the contrary, 

(i) Seller’s sole obligation for software that when properly installed and used does not substantially conform to the publish ed specifications in effect when the 
software is first shipped by Seller, is to use commercially reasonable efforts to correct any reproducible material non-conformity (as determined by Seller in its sole 
discretion) by providing the customer with: (a) telephone or e-mail access to report non-conformance so that Seller can verify reproducibility, (b) a software patch or 
bug fix, if available or a workaround to bypass the issue if available, and (c) where applicable, replacement or damaged or defective external media, such as CD-ROM 
disk, on which the software was originally delivered;  

(ii) Seller does not warrant that the use of any software will be uninterrupted, error-free, free of security vulnerabilities or that the software will meet the customer’s 
particular requirements; and the customer’s sole and exclusive remedy for breach of this warranty is, at Seller’s option, to receive (a) suitably modified software, or 
part thereof, or (b) comparable replacement software or part thereof;  

(iii) Seller retains all right, title and interest in and to and ownership of all software (including all Core Pro duct Software and Non-Core Software) including any and all 
enhancements, modifications and updates to the same; and 

(iv) in some cases, the warranty on certain proprietary sub-assembly modules manufactured by third-party vendors and contained in Seller’s products, third party 
software installed in certain of Seller’s products, and on certain private–label products manufactured by third-parties for resale by Seller, will be of shorter duration 
or otherwise more limited than the standard Seller limited warranty. In such cases, Seller's warranty with respect to such third-party proprietary sub-assembly 
modules, third-party software and private-label products will be limited to the duration and other terms of such third-party vendor's warranty, if any. In addition, 
certain products, that are not manufactured by Seller, but are resold by Seller, may carry the original OEM warranty for such  products, if any.  The limited warranty 
set forth above does not apply to any product sold by Seller, which at the time of sale constituted a Refurbished/Closeout Product, the limited warranty for which is 
provided in the following paragraph. 

Seller will at its sole option, either repair or replace (with a new or factory-reconditioned product, as Seller may determine) any product sold by Seller which at the 
time of sale constituted a refurbished or closeout item (“

Refurbished/Closeout Product

”), which is defective in materials or workmanship or fails to meet the 

applicable specifications that are in effect on the date of shipment of that product or fails to meet such other specifications as may have been expressly agreed upon 
in writing between the parties, for a period of ninety (90) days from the date of original purchase.  Notwithstanding the foregoing, in some cases the warranty on 
certain proprietary sub-assembly modules manufactured by third-party vendors and contained in Seller products, third party software installed in certain of Seller’s 
products, and on certain private–label products manufactured by third-parties for resale by Seller will be of shorter duration or otherwise more limited than Seller 
limited warranty for Refurbished/Closeout Products.  In such cases, Seller's warranty for Refurbished/Closeout Products constituting such third party proprietary 
sub-assembly modules, third party software, and private-label products will be limited to the duration and other terms of such third-party vendor's warranty, if any. 
In addition, notwithstanding the foregoing, (i) certain Refurbished/Closeout Products that are not manu factured (but are resold) by Seller, may carry the original OEM 
warranty for such products, if any, which may be longer or shorter than Seller’s limited warranty for Refurbished/Closeout Pr oducts.  All sales of 
Refurbished/Closeout Products are final. 

To obtain service under this warranty, the defective product, together with a copy of the sales receipt, serial number if applicable, or other satisfactory proof of 
purchase and a brief description of the defect, must be shipped freight prepaid to Seller at the following address: One Jake Brown Road, Old Bridge, New Jersey 
08857. 

This warranty does not cover failure of performance or damage resulting from (i) use or installation other than in strict acc ordance with manufacturer's written 
instructions, (ii) disassembly or repair by someone other than the manufacturer or a manufacturer-authorized repair center, (iii) misuse, misapplication or abuse, (iv) 
alteration, (v) exposure to unusual physical or electrical stress, abuse or accident or forces or exposure beyond normal use within specified operational or 
environmental parameters set forth in applicable product specifications, (vi) lack of reasonable care or (vii) wind, ice, sno w, rain, lightning, or any other weather 
conditions or acts of God. 

OTHER THAN THE WARRANTIES SET FORTH ABOVE, SELLER MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND, EXPRESS OR IMPLIED, AS 
TO THE CONDITION, DESCRIPTION, FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR AS TO ANY OTHER MATTER, AND SUCH WARRANTIES 
SET FORTH ABOVE SUPERSEDE ANY ORAL OR WRITTEN WARRANTIES OR REPRESENTATIONS MADE OR IMPLIED BY SELLER OR BY ANY OF SELLER’S 
EMPLOYEES OR REPRESENTATIVES, OR IN ANY OF SELLER’S BROCHURES MANUALS, CATALOGS, LITERATURE OR OTHER MATERIALS. IN ALL CASES, BUYER’S 
SOLE AND EXCLUSIVE REMEDY AND SELLER’S SOLE OBLIGATION FOR ANY BREACH OF THE WARRANTIES CONTAINED HEREIN SHALL BE LIMITED TO THE 
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT F.O.B. SHIPPING POINT, AS SELLER IN ITS SOLE DISCRETION SHALL DETERMINE. SELLER SHALL IN 
NO EVENT AND UNDER NO CIRCUMSTANCES BE LIABLE OR RESPONSIBLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, PUNITIVE, DIRECT OR SPECIAL 
DAMAGES BASED UPON BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT LIABILITY OR OTHERWISE OR ANY OTHER LEGAL 
THEORY, ARISING DIRECTLY OR INDIRECTLY FROM THE SALE, USE, INSTALLATION OR FAILURE OF ANY PRODUCT ACQUIRED BY BUYER FROM SELLER.  

All claims for shortages, defects, and non-conforming goods must be made by the customer in writing within five (5) days of receipt of merchandise, which writing 
shall state with particularity all material facts concerning the claim then known to the customer. Upon any such claim, the customer shall hold the goods complained 
of intact and duly protected, for a period of up to sixty (60) days. Upon the request of Seller, the customer shall ship such allegedly non-conforming or defective 
goods, freight prepaid to Seller for examination by Seller's inspection department and verification of the defect. Seller, at its option, will either repair, replace or issue 
a credit for products determined to be defective. Seller's liability and responsibility for defective products is specificall y limited to the defective item or to credit 
towards the original billing. All such replacements by Seller shall be made free of charge f.o.b. the delivery point called for in the original order. Products for which 
replacement has been made under the provisions of this clause shall become the property of Seller. Under no circumstances are products to be returned to Seller 
without Seller's prior written authorization. Seller reserves the right to scrap any unauthorized returns on a no-credit basis. Any actions for breach of a contract of 
sale between Seller and a customer must be commenced by the customer within thirteen (13) months after the cause of action has accrued. A copy of Seller's 
standard terms and conditions of sale, including the limited warranty, is available from Seller upon request. Copies of the limited warranties covering third-party 
proprietary sub-assembly modules and private-label products manufactured by third-parties may also be available from Seller on request.  

(Rev 0713) 

One Jake Brown Road

Old Bridge, NJ 08857-1000 USA

732-679-4000 • Fax 732-679-4353

www.blondertongue.com

Summary of Contents for HDE-4S-PRO









































Reviews:

Related manuals for HDE-4S-PRO