-11-
Preferred input method:
Select an input method as preferred method.
Auto update time:
Turn on/off this function as per your need.
UART settings:
Select SIM1 or SIM2.
Display
Users can access this item to set wallpaper, screen saver, power on/off display, etc.
Call settings
Caller ID:
You can select the ID set by the network, hide the ID, or send the ID. By default, the ID set
by the network is chosen.
Call waiting
: Network dependent
Call diverts:
this network function enables you to forward incoming calls to another number you have
previously specified.
Call barring:
The call barring function enables you to bar calls as needed. When setting this function,
you need to use a network barring code, which can be obtained from the network operator.
Line switching
: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the implementation of the network operator.
Advanced setup
Blacklist
:
Access this menu to set blacklist and its members.
Auto redial
:
Set it to
On
or
Off
to enable or disable auto redial. To end the auto redial process, press the
End
key.
IP dial
: Set IP dial related parameters.
