9
EN
Check the Bloom App
1. Answer the questions. When you are presented with a
multiple-choice question, choose all answers that apply
and then confirm to proceed.
2. After around 20 minutes, the results from the Bloom
Lab will be transmitted to the Bloom App. The app will
alert you that the Bloom AMH Report is ready.
3. View the personalized Bloom AMH Report.
Information: If the Bloom App disconnects from the Bloom
Lab during the measurement process, the Bloom Lab com-
pletes the measurement process and saves the measure-
ment value locally for a 3-hour period. If the same Bloom
App reconnects with the Bloom Lab during this period, the
saved measurement value will be sent to the Bloom App
and the Bloom Lab will subsequently delete the measure-
ment value and any unique identifi er of the Bloom App.
After a 20-minute period other Bloom Apps will be able
to connect to the Bloom Lab and perform new tests, which
will automatically delete the previous results.
4.4. Device cleaning
Caution: Please use protective equipment, such as gloves,
when cleaning the surfaces of the Bloom Lab to avoid
contamination.
After performing the Bloom AMH Test, please make sure to
leave a clean workspace. Thoroughly wipe all surfaces of
the Bloom Lab after every use with the provided disinfec-
tion cleaning wipe. Please check gaps for stains and clean
thoroughly when needed.
5. Storage
In order to avoid hazardous situations, the Bloom AMH Test
should be stored with care at all times, this includes:
• The recommended storage temperature b8°C
and +30°C (46°F and 86°F).
• A dry indoors environment without direct or excessive heat
and humidity below 80% (bathrooms not suitable).
• Out of reach for children to avoid injury through misuse of
components like lancets.
6. Bloom Lab LED indications
The Bloom Lab performs a self test during each start-up of the
device. Additional internal tests are performed during each
measurement to check for the correct function of the device.
The proper function of the Bloom Lab is indicated via the LED
indicator at the front of the device. See section 6.1. for more
information. In case of malfunction, the user is informed by
the Bloom App and the LED indicator (see table N°2).
6.1. Proper function
The correct function and readiness of the Bloom Lab are
indicated by the LED ring. See table N°1 for the meaning of
the various indications:
1.
2.
Bloom Lab is turning
on
Bloom Lab is ready
Pairing success
Waiting for sample
collection
A white light circle is
closing representing the
start-up progress of the
Bloom Lab. Duration:
< 1 minute.
A dimmed but stable
ring of white light
awaits user interaction.
A white light merging together from both ends to
form a circle indicates that the Bloom App and
the Bloom Lab are pairing. Successful pairing is
notified by a white heart beat pattern. Duration:
<10 seconds.
A white, soft, heartbeat
pulse indicates that the
Bloom Lab is waiting
for a sample to be
collected.
Summary of Contents for AMH test
Page 56: ...www bloomdiagnostics com ...
