Move
(Oscillating Wash)
Functions & Operation
Move cleansing runs by pressing the "CLEANSING" or "BIDET" button while
cleansing or bidet cleansing.
Nozzle stops by pressing the "CLEANSING" or "BIDET" button again.
8
Auto Cleansing
To activate the automatic cleansing function, press the "AUTO CLEAN" button.
The move(oscillating) wash function and warm air dryer will operate for 1 minute
each after activation.
Can return to the previous auto-clean function that was set up when canceling
auto-clean function or pressing the stop button.
This function is useful for individuals with impairments that make it difficult to
select custom settings. It is also convenient for use with children.
A buzzer will sound when the auto cleansing function is finished.
Default settings for this function are Level 3 for water pressure, Level 2 for warm
air drying temperature and Level 3 for the nozzle position. These settings may be
adjusted to suit user preference.
When activated, the auto cleansing function will revert settings for both water and
seat temperature to "Medium" by default. Setting may be adjusted to suit user
preference.
Massage
Press the "MASSAGE" button for pulsating water, while cleansing or bidet function
is activated. (Massage is not available on the lowest level of water pressure.)
Stop the massage function by pressing the "MASSAGE" button again.
Auto Drain
If the product is not used for a long time, Press the "AUTO DRAIN" button.
Then, the water in the water tank drains for 3 minutes and clean water flows into
the water tank.
Press the "STOP" button to stop.
