Deodorization automatically starts.
When seated, "DEODORIZER" indication lights up.
Move cleansing runs by pressing "CLEANSING" or "BIDET"button
while using.
It beeps if cleansing or bidet cleansing function is over.
It beeps if dryer function is over.
Operate either the "CLEANSING" or the"BIDET" function.
Each function operates for 1 minute.
The "DRY" indication lights up and warm air dryer starts.
Dryer function will operate for 3 minutes.
(Running for 1 minute in auto-clean mode)
Drying operation can be maximized by gently wiping wet area with
toilet paper.
Sit on the seat
When using the unit, please sit in center.
If the "CLEANSING" or "BIDET" function is operated for a long time, water temperature will
drop gradually. To regain warm water, resume operation after 3 minutes.
(The seat sensor may not be properly activated, if not seated in center. Please refer to 'seat sensor' on 12 page.)
"CLEANSING", "BIDET" and "DRY" button on the unit control panel is supplementary ones which is used
in case of remote control breakdown or battery out, then the adjustment of the water pressure and the
warm air temperature are not available through the unit panel control.
You need to press "CLEANSING" or "BIDET" or "DRY" and related control buttons on the Remote Control
to adjust water pressure or the temperature of warm air.
