How to take Measurements
To start taking measurements first choose the "Measure" icon below the screen.
You will be prompted to stand on the scale. Please step on and stay on the scale to start.
Pairing Mobile Device with Scale
The scale display will continuously flash “PAIR” (see below) if you are on top of the scale but it’s not
properly paired to your mobile device yet.
At this point:
The “Get Started” page will give you instructions on
how to activate your Bluetooth if it’s not already turned
on or if the device is not properly chosen. If you know
that it is connected wait to be directed to the next page.
If Bluetooth is not on or connected leave app and go to
the “Setting” page of the iOS. From there choose
“Bluetooth”
Turn ON Bluetooth if not already on and select
"BlueAnatomy iBF5" to pair the device with the scale.
Once the device is selected in the Bluetooth page you
should automatically be directed back into the Blue
Anatomy app. If not please exit the setting page and
open the Blue Anatomy app from the Home Screen. Go
back to the “Get Started” page and wait to be directed
to the “Record” page
Scale only mode:
By stepping on the scale for 3
seconds or more, then immediately stepping off and on
again you will be able to take a regular weight reading
ONLY. This information will not be saved onto your
mobile device
7
