MAGNUM ETX
Installation
Page | 14
Figure 2: ensure mounting pillars are fitted to host board
The next action is to carefully align the connectors of the daughter board with those on the host board and
carefully press together.
Note: The Hirose connectors are offset from each other, so the daughter board will only fit on one orientation.
Trying to force the daughter baord in the wrong orientation may damage the connectors
Figure 3: Align daughter board connectors with the host board
If the memory module is not already fitted, then carefully fit the memory module onto the memory socket. The
socket is notched to indicate the orientation of the module
At this stage, the cooling solution should be applied. There are several different methods of cooling the Magnum
ETX
