BGNR-30 POWERED WALKIE REACH STACKER—OWNER’S MANUAL
2
ISSUE DATE: MARCH 16, 2016 REV.0 (PART # 038-969E)
TO PREVENT SERIOUS RISK OF INJURY TO YOURSELF AND OTHERS OBSERVE THE FOLLOWING
SAFETY INSTRUCTIONS.
This Reach Truck may become hazardous if adequate maintenance is neglected. Therefore, adequate
maintenance facilities, trained personnel and procedures should be provided. Maintenance and inspection shall
be performed in conformance with the following practices:
1. A scheduled planned maintenance,lubrication and inspection system should be followed.
2. Only qualified and authorized personnel shall be permitted to maintain, repair, adjust, and inspect Reach
Truck.
3. Before leaving the Reach Truck:
– Do not park the Reach Truck on an incline.
– Fully lower the load forks.
– Press the emergency brake switch .
– Set the key switch to the “OFF” position and remove the key.
4. Before starting to operate Reach Truck:
– Be in operating position
– Place directional control in neutral
– Before operating Reach Truck, check functions of lift systems, directional control,speed
control,steering, warning devices and brakes.
5. Avoid fire hazards and have fire protection equipment present. Do not use open flame to check lever, or
for leakage of electrolyte and fluids or oil. Do not use open pans of fuel or flammable cleaning fluids for
cleaning parts.
6. Brakes,steering mechanisms, control mechanisms,guards and safety devices shall be inspected regularly
and maintained in legible condition.
7. Capacity, operation and maintenance instruction plates or decals shall be maintained in legible condition.
8. All parts of lift mechanisms shall be inspected to maintain them in safe operating condition.
9. All hydraulic systems shall be regularly inspected and maintained in conformance with good practice.
Cylinders, valves and other similar parts shall be checked to assure that “drift” has not developed to the
extent that it would create a hazard.
10. Reach Truck shall be kept in a clean condition to minimize fire hazards facilitate detection of loose or
detective parts.
11. Modifications and additions which affect capacity and safe Reach Truck operation shall not be performed
by the customer or user without manufacturers prior written approval. Capacity, operation and maintenance
plates or decals shall be changed accordingly.
WARNING
