EPJ-25 ELECTRIC PALLET JACK—OPERATOR’S MANUAL
12
ISSUE DATE: DECEMBER 7, 2020 REV. 1.0 (PART # 038-1074E)
11.1 OPERATION - DRIVING INSTRUCTIONS
Control Handle
All directional and speed controls are located on the control handle. Forward
and reverse are controlled by rotating the speed control lever as shown. The
lever is spring loaded to return to neutral when released. Further rotation in
either direction will progress the truck from slow to maximum travel speed.
To change directions or to stop the truck, rotate the speed control lever in the
opposite direction. The truck will come to a stop and then, unless the controls
are returned to the center neutral position, accelerate in the opposite direction.
Steering
Moving the control handle (which connects to the steering arm) right or left will
turn the truck right or left. When maneuvering around corners, make square
turns and be sure there is adequate clearance.
