16
OPERATING INSTRUCTIONS
Press
1
Push
3
2
23 GA 1 INCH PIN NAILER
BEFORE LOADING OR UNLOADING FASTENERS, MAKE
SURE THE TOOL IS DISCONNECTED FROM THE AIR
SUPPLY, THE TRIGGER IS NOT DEPRESSED, AND THE
TOOL IS NOT POINTING TOWARD ANYONE.
1. Press the release switch on the movable magazine so the
movable magazine releases from the fixed magazine housing.
Once switch is released, slide the movable magazine to the
open position.
NOTE:
Before inserting any staples into the gun make sure you
are using the proper staple with the proper nail gun. If the
incorrect staple is used, bodily injury or property damage may
occur. Make sure that the staple is facing the proper direction
in the magazine before use. Please consult your retailer if you
have any questions on which staple is the correct one to be
used with this tool or how to place the staples properly into the
magazine.
2. Insert the finishing nail into magazine
the fixed magazine, slide the movable magazine to the
closed position. The movable magazine must be securely
closed. Ensure the movable magazine is properly closed
and locked into place and that the movable magazine cannot
accidentally open unless the release switch is pressed.
Once the nailer has been properly reloaded and is secure,
reconnect air supply.
3. Once the nails/fasteners have been properly inserted into
NOTE:
It’s recommended to test fire the nailer on a scrap piece
of wood to make sure the depth setting on the nailer is set
properly.
www.lowes.com
®
