The Home Screen (continued)
If your app is connected to a BIT ELD adapter,
the ELD will set the vehicle listed in your
Current Load Out. If the vehicle listed on your
screen is not the vehicle you are driving, tap
the
“EDIT” icon to scan for other BIT ELD adapters
in range.
If your app is not connected to a BIT ELD
adapter, tapping the “EDIT” icon will open a list
of all the registered vehicles in your carrier's
fleet. You can select any of these vehicles for
your Current Load Out. Tap “Add New Truck” to
add a new vehicle to the fleet.
You can select up to three trailers at one time
for your Current Load Out. Tap the “EDIT”
icon
to select any registered trailers from your
carrier's fleet. Tap “Add New Trailer” to add a
new trailer to the fleet.
Notifications and Suggested Changes
Any uncertified logs, unidentified driver logs,
or suggested log changes will be shown below
the Current Load Out. You may have to swipe
up on
the screen to see all of the data for these
notifications.
Tap “VIEW” to see the data in more detail on
the “Hours of Service” screen. Tap the check-
mark to accept the changes or certify that
record. Tap “X” to dismiss the notification and
see the next one. Notifications are displayed in
chronological order
,
so you will see the oldest
record first.
Approving uncertified logs will prompt you to
certify your logs for the day displayed. Any
changes made later will require you to recertify
that day's log.
Unidentified driver logs
are records of drive time
automatically recorded by the
BIT ELD adapter when no
driver was connected via the
Blue Ink Tech app
to claim
the drive time. Accepting
unidentified drive time will
insert the displayed duty
status changes into your log.
Suggested log changes are
edits made by your carrier
administrator or by your
co-driver that will affect your
logs. Accepting the changes
will update your existing
records with the suggested
edits. You can also reject
suggested log changes to
keep your existing records.
10