3
Blue Lagoon UV-C Tech
GB
Please read through these instructions for use carefully before installing this device.
Operation
In the Blue Lagoon UV-C Tech, a UV-C radiation with a wavelength of 253.7 nm is generated by the special UV lamp, ensuring a lethal effect
on bacteria (including Legionella bacteria). The Blue Lagoon UV-C Tech will ensure that your pool water is clean, fresh and clear in an efficient
and environmentally-friendly manner. The water is led through the UV-C device via a pump. The UV-C radiation neutralises bacteria, viruses
and other primitive organisms and stops them from multiplying. The Blue Lagoon UV-C Tech has a built-in high-frequency electronic ballast,
which absorbs current fluctuations, thereby protecting the lamp. In addition, the stainless steel interior ensures the reflection of the UV-C
rays, thereby increasing the efficiency up to 35%. Thanks to the Blue Lagoon UV-C Tech, your swimming pool water will be disinfected
efficiently and safely, and the quality of your water will remain excellent.
Advantages of UV-C treatment:
• Ensures fresh, clean and clear water
• Disinfects water efficiently and safely
• Bound chlorine is broken down by UV-C light
• Protects your pool from germs
• Keeps the formation of mould, bacteria and algae under control
• Can reduce the use of chlorine and other chemicals up to 80%
• Prevents the smell of chlorine and irritation to the skin and eyes (red eyes)
• More environmentally-friendly than traditional methods
Advantages of the Blue Lagoon UV-C Tech:
• Up to 35% more UV-C yield as a result of reflection
• Includes a UV-C Tech lamp
• 316L stainless steel housing
• Easy installation and maintenance
• 2-year guarantee with respect to manufacturing faults
• Earthed
Safety
This device Produces harmful radiation. Direct contact could jeopardise the eyes and skin. Only check the operation of the UV-C lamp
via the transparent components of the unit.
- Always plug the device into a socket with a Protective cover.
- Always comply with the electricity company’s regulations with regard to any permanent connection to the mains. If there is any doubt
regarding the connection, consult a recognised fitter or the electricity company. Always work with a residual current-operated circuit-breaker.
- The device must be switched off if water treatment agents or medication are used.
- Always remove the plug from the socket before carrying out any maintenance or repair work on the unit. Never insert the plug / pull the
plug from the socket when you are standing in water or if your hands are wet.
- Never submerge this device in water.
- Keep children away from this device and from the cable.
- The cable of the device cannot be replaced. The complete electrical unit must be replaced if there is any damage to the power cable. Never
remove the plug; leave the electrical unit intact. An electrical unit with the plug removed will no longer be covered by the guarantee.
- Once the device has been switched off, the lamp will remain hot for approximately 10 minutes.
- Do not use the device if any of the components are damaged (in particular the quartz glass).
- Remove the device if there is a risk of freezing during the winter months.
- The stainless steel housing of the device is not suitable for salt water baths with a high salt content. If the salt content is too high, the steel
will oxidise and damage the housing. Always install the device immediately behind the filter.
- Never install the machine after the heater. When the lamp is not sufficiently cooled by the water there is a chance that the bulb can burn.
- This Product can only be used according to the guidelines described in these instructions for use.
