background image

DroneBeacon db200 manual - version 1.0 September 2022 - © BlueMark Innovations BV 2022

5/11

1 I

NTRODUCTION

Thank you for purchasing and using DroneBeacon products!

The latest version of this user manual can be downloaded at the following link, where the most
up-to-date version is located:

https://download.bluemark.io/db200.pdf

(Direct/Broadcast) Remote Identification (Remote ID) adds “beacon” capability to drones to
broadcast basic information of airborne drones, such as the operator's registration number, drone
serial number and current position. The EU, USA and Japan plan or have new rules that make
Remote ID mandatory for drones over 250 grams weight. The beacon information can be used by
general public, law enforcement and drones to give better situation awareness of the airspace
around them.

BlueMark Innovations BV offers Remote ID transponders and receivers. DroneBeacon is an add-on
(transponder) for drones which broadcasts Remote ID beacon signals. DroneScout is a receiver that
detects Remote ID signals of nearby drones up to several km distance (in open space). See

https://dronescout.co

for more information about our products.

2.1 Audience

This document is intended for users that want to use the

DroneBeacon MAVLink db200

transponder

that can be integrated into drone products. It is designed for drone manufacturers, system
integrators or DIY enthusiast. For the

DroneBeacon

transponder -a standalone transponder- there is

a separate manual.

2.2 Specifications

The transponder consists of an embedded system and several radio-interfaces to broadcast Remote
ID signals.

Key specifications:

Radio module:

Espressif ESP-C3 module

output power Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW)

FCC/CE certified radio module

Antenna:

3 dBi omni-directional antenna with IPEX connector (included)

Firmware

: ArduRemoteID (

https://github.com/ArduPilot/ArduRemoteID

)

Compliant with international regulations

EU

ASD-STAN DIN EN 4709-002

USA

ASTM Remote ID Standard ASTM F3411-22a-RID-B/ F3586-22

FAA ready

1

1

We can help business customers in our BlueMark Partner program

https://bluemark.io/drone-remote-id-partner-program/

to submit a Declaration of Compliance (DoC).

Summary of Contents for DroneBeacon MAVLink 200 Series












Reviews: