3
KIT CONTENTS
This instruction manual is designed to help you build a straight, great flying airplane. Please read this
manual thoroughly before beginning assembly of your new Blue Max. Use the parts listing below to
identify and separate all parts before beginning assembly.
** KIT CONTENTS** We have organized the parts as they come out of the box for better identification
during assembly. We recommend you regroup the parts in the same manner. This will ensure you have all
of the parts required before you begin assembly and will also help you familiarize yourself with each part.
o
{2} Nylon Clevises w/2mm I.D. Hole
o
{2} 2mm x 150mm Threaded Rod
o
{2} Nylon Snap Keepers
o
{2} Nylon Adjustable Control Horns
o
{1} 2mm x 300mm Pushrod Wire
o
{1} Adjustable Servo Connector Assembly
o
{2} Nylon Motor Mount Beams
o
{4} 3mm x 25mm Machine Screws
o
{4} 3mm x 20mm Machine Screws
o
{4} 3mm Nylon Insert Nuts
o
{4} 3mm Blind Nuts
o
{12} 3mm Flat Washers
o
{1} Aileron Servo Tray (W-39)
o
{1} Forward Dihedral Brace (W-40)
o
{1} Rear Dihedral Brace (W-41)
o
{2} Wing Hold Down Dowels (W-43)
o
{1} Fuselage Servo Tray (D-47)
o
{6} 3mm x 10mm Machine Screws
o
{6} 3mm Flat Washers
o
{4} 3mm x 12mm Wood Screws
o
{2} Wing Halves w/Ailerons and Hinges
o
{1} Fuselage
o
{1} Horizontal Stabilizer w/Elevator and Hinges
o
{1} Vertical Stabilizer w/Rudder and Hinges
o
{2} Wing Struts
o
{1} Wire Main Gear Assembly
o
{1} Wire Nose Skid
o
{2} Nylon Mounting Straps w/4mm Slot
o
{5} Nylon Mounting Straps w/3mm Slot
o
{2} 127mm Diameter Wire Spoke Wheels
o
{2} Nylon Axle Spacers
o
{2} Wheel Collars w/3mm x 6mm Machine Screws
o
{14} 3mm x 12mm Wood Screws
o
{1} Tail Wheel Wire w/ Mounting Bracket
o
{1} 25mm Diameter Tail Wheel
o
{2} Wheel Collars w/3mm x 6mm Machine Screws
o
{3} 3mm x 12mm Wood Screws
o
{1} 990mm Nylon Pushrod
o
{1} 1.5mm x 50mm Threaded Wire w/Z-Bend
o
{1} 1.5mm x 45mm Wire Threaded Each End
o
{1} Nylon Clevis w/1.5mm I.D. Hole
o
{1} Nylon Control Horn
o
{1} Nylon Control Horn Backplate
o
{2} 2mm x 15mm Machine Screws
o
{1} Molded Fuel Tank
o
{1} 20mm Front Squash Plate
o
{1} 18mm Rear Squash Plate
o
{1} Rubber Stopper
o
{1} 70mm Length of Fuel Tubing
o
{1} Metal Weighted Pick-Up
o
{3) Aluminum Tubes
o
{1} 3mm x 20mm Machine Screw
o
{1} 990mm Nylon Pushrod
o
{1} 1.5mm x 50mm Threaded Wire w/Z-Bend
o
{1} 1.5mm x 45mm Wire Threaded Both Ends
o
{1} Nylon Clevise w/1.5mm I.D. Hole
o
{1} Nylon Control Horn
o
{1} Nylon Control Horn Backplate
o
{2} 2mm x 15mm Machine Screws
RUDDER CONTROL SYSTEM
ELEVATOR CONTROL SYSTEM
TAIL WHEEL ASSEMBLY
MAIN GEAR ASSEMBLY
AIRFRAME ASSEMBLIES
AILERON CONTROL SYSTEM
MOTOR MOUNT ASSEMBLY
MISCELLANEOUS ITEMS
FUEL TANK
THROTTLE CONTROL SYSTEM
PILOT AND CANNON ASSEMBLY
o
{1} Prepainted Balsa Cannon Mount
o
{2} Plastic Body Halves
o
{2} Plastic Cannon Halves
o
{2} Plastic Head Halves
o
{1} Balsa Barrel Seat Platform
o
{1} Plastic Barrel Seat
o
{1} Plastic Barrel Seat Back
