10
ASSEMBLY INSTRUCTIONS
12.
CONNECTING THE LIGHT KIT --
Position the light kit plate and stem
under the fan. Connect the light kit
wiring harness by inserting the white
wire from the fan to the white wire
from the light kit and the black wire
from the fan to the black wire from
the light kit. Be sure connections are
firmly inserted and secure.
13.
Remove the (4) pre-installed screws
on the ring on the bottom of fan and
line up the holes with the (4) holes on
the light kit plate. Firmly secure the
light kit plate to the fan with the (4)
screws.
14.
Screw in (2) LED bulbs provided into
the light kit sockets
INSTALLING THE LIGHT KIT GLASS
AND FINIAL
–
Place the glass bowl
through the threaded stem on bottom
of light kit. While holding the glass
bowl in place, slide on the plastic
washer, secure the nut (DO NOT
OVER TIGHTEN), slide on the
decorative cap, and screw on the
finial (DO NOT OVER TIGHTEN).
14
12
13
14