5
ASSEMBLY INSTRUCTIONS
1.
Turn OFF the electrical power at the
main fuse or circuit breakers.
NOTE:
Before continuing installation,
confirm that the power is still turned
off at the main circuit breaker or by
removing the correct fuse. Turning
the power off using a wall switch is
not sufficient to prevent electrical
shock.
2.
Secure the mounting bracket to the
outlet box (not included) using the
screws and washers provided with the
outlet box.
WARNING:
To reduce the risk of fire
electrical shock, or personal injury,
mount to the outlet box marked
“acceptable for fan support” using the
mounting screws and washers
provided with the outlet box.
3.
DOWNROD ASSEMBLY & MOUNT
–
Remove the downrod pin and
downrod clip from the downrod.
Slide the canopy onto the downrod
with the open end facing up toward
the ball. Then slide the yoke cup onto
the downrod with the flat end toward
the canopy and downrod ball.
1
2
3
Downrod Clip
Yoke Cup
Downrod Pin
Downrod
