Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
0
Owner’s manual: model 82300C portable outdoor heater
Step 9 – Securing the Tank
Mount your 20 lb . cylinder to a sturdy object such as a table or
post within 3 to 4 feet of your heater when in use, this will prevent
movement or tipping of the cylinder during operation .
The clamp on the cylinder ring will attach to any round pole from ” to
2” in diameter, or a square post from ” to 2” square . It will also adapt
to various other shapes up to 2” wide .
Determine where to locate your 20 lb . cylinder . Be sure that it is within
2” what you are mounting it to .
Place the bracket halves around the object and insert the 2” bolts
through the open holes in one bracket and into the matching threaded
holes in the second bracket . Position bracket within 6” of the middle of
the cylinder . Finger tighten bolts .
Slide the 20 lb . cylinder into the curved portion of the bracket, making
sure strapping ends are not between cylinder and bracket . Enclose
cylinder in strap and securely tighten strap in buckle .
Using a 7/6” wrench, tighten the 2” bolts until they are secure . DO
NOT OVER TIGHTEN .
In some cases you may wish to secure your cylinder to a larger object
or a wall . It is possible to mount the bracket attached to the straps to
these surfaces by drilling matching holes and using screws and nuts or
lag screws (not provided) to secure your cylinder .
Note:
Once you have read “safety first” and successfully completed
Steps – 9, you are ready to begin operating your heater .
