7
Owner’s manual and assembly instructions: model 235020 outdoor patio heater 1/15/03
Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 2 – Attach Platform to Legs
• Line up hole in Clip with small threaded hole on bottom of Platform.
• Attach Clip loosely to Platform with (1) Large Screw.
Note:
Do not tighten until step 10.
• Using 7/16” wrench, secure Platform to Legs using (2) Bolts, (2)
Small Lock Washers and (2) Small Nuts per Leg. Tighten fully.
• Fully tighten all nuts and bolts from Step 1.
Step 3 – Attach Weight Plate to Base
• Lay Base Assembly on its side.
• Line up slots at outside edge of Weight Plate with hooks on Wheel
Bracket.
• Place Weight Plate in Base, feet out.
• Insert Carriage Bolt through center holes of Base and Plate.
• Using 9/16” wrench, secure Plate to Base using a (1) Large Lock
Washer and (1) Large Nut.
• Place Base Assembly upright.
TIP:
To tighten use a 7/16” wrench on Bolt and a 7/16” socket wrench on Nut.
