Cleaning emitter and burner. Series 6000-93000 LP Gas 405121
10
®
For assistance call 1.800.762.1142.
Cleaning emitter and burner. Series 6000-93000 LP Gas 405121
11
®
For assistance call 1.800.762.1142.
Step 11
After the burner and the emitter are clean, reassemble the burner to the main supply tube. Be careful to insert the
thermal-couple and igniter into the hole in the heat shield. Before reattaching the emitter to the emitter bottom,
insert a propane tank into the valve housing and check to ensure that the heater lights.
Make sure the burner sits straight.
Note:
The burner top cannot be tipped to one side or the other. If the burner is not straight; the emitter will not be
heated evenly. This will cause the heater to perform improperly. Once the burner is installed correctly, replace
emitter and dome.
