Operation
14
Lighting the Oven Pilot Burner
This oven is fitted with a pilot as a standard option and flame
failure protection, which is incorporated by way of a
thermo-electric system for the main burner. Flame failure
protection will shut off the gas supply to the burner in the
event that the pilot burner goes out, so that un-burnt gas is not
expelled.
This is an important safety feature which is
slowly becoming law throughout the world
.
1.
Open the oven door. Partially depress the thermostat
control knob whilst turning anti-clockwise to the ‘Pilot’
position.
DO NOT fully depress the Control Knob
whilst trying to rotate anti-clockwise as the Knob
and Gas Valve will be damaged.
2.
With the thermostat control knob in the ‘Pilot’ position,
keep the knob depressed whilst pressing the piezo igniter
button. (Each press of the piezo igniter button will
generate a single spark).
3.
Hold in the thermostat control knob depressed for
approx. 10-20 seconds, then release. The pilot burner
should remain alight. (If the pilot does not light, repeat
Items 1 to 3 above).
4.
View the oven pilot burner through the holes in the front
of the sole plate with the oven door open.
Lighting the Oven Main Burner
1.
Ensure that the pilot burner is alight.
2.
Rotate the thermostat control knob anti-clockwise to the
desired temperature marked on the knob.
3.
The main burner will now ignite automatically, from the
pilot burner.
Turning the Oven to ‘Stand-by’ (Pilot ‘ON’ Only)
NOTE: DO NOT attempt to rotate the T
hermostat
Control
Knob anti-clockwise back to the ‘Pilot’ position as
the Knob and Gas Valve will be damaged.
1.
Rotate the thermostat control knob clockwise to the
‘Pilot’ position. The main burner will extinguish and
the pilot burner will remain alight.
Pilot Burner
viewing holes
Fig 4
DO NOT USE aluminium foil or trays directly on the cast
iron sole plate(s). NEVER block or cover the openings on
each side of the sole plate(s).
! IMPORTANT
Control Knob in
Pilot Position
Depress and Rotate Knob
Anti-Clockwise to Pilot Position
Piezo Igniter
Button
Control Knob in Main
Burner Operating Position
Rotate Knob Anti-Clockwise
to Operating Temperature
Control Knob in
Pilot Position
Rotate Knob Clockwise to Pilot Position
Piezo Igniter
Button
