25
Replacement Parts List
When ordering replacement parts, please quote the part number and the description as listed below.
If the part required is not listed below, request the part by description and quote model number and
serial number which is shown on the rating plate.
Controls
227444 Burner
(GP8600G).
227443 Burner
(GP8900G
/
GP8120G).
019464K Pilot
Burner
Kit.
229407
Overtemp 365° Millivolt.
229885
Thermocouple Interruped - Leaded
(If Overtemp Fitted).
019218
Thermocouple
(If no Overtemp Fitted).
230416
Gas Control / Thermostat.
227386
Gas Control Knob - 100°C to 290°C.
032360
Main Injector
(Nat) Ø 3.60mm
(GP8600G - Non-UK).
032340
Main Injector
(Nat) Ø 3.40mm
(GP8600G - UK only).
032300
Main Injector
(Nat) Ø 3.00mm
(GP8900G).
032285
Main Injector
(Nat) Ø 2.85mm
(GP8120G).
032210
Main Injector
(LPG) Ø 2.10mm
(GP8600G).
032180
Main Injector
(LPG) Ø 1.80mm
(GP8900G).
032170
Main Injector
(LPG) Ø 1.70mm
(GP8120G).
019593
Pilot Injector
(Nat) 0.41.
019594
Pilot Injector
(LPG) 0.25.
228531
Regulator (RV48CLM) - (Natural Gas/LPG - convertible) - ¾” BSP female.
General
228400 Grease
Drawer.
227850
Leg 150mm (Adjustable) (Flush Stud)
- CB and RB Models.
227851
Leg 150mm (Adjustable) (Extended Stud) - LS Models.
227855
Leg 80mm
- B Models.
229674
Rear Roller Assy
- CB and LS Models.
232351
Rear Roller Assy (3”)
- RB Models.
Griddle Plate Options
Replacement Parts List
Griddle Plate
Standard
Chromed-(C)
Ribbed & Chromed Options
600mm 228584 228157
900mm 228585 227641
1200mm 228586 227650
ON REQUEST (depending on ribbed
section width on LH or RH side.
IMPORTANT:
Only genuine authorised replacement parts should be used for the servicing and
repair of this appliance. The instructions supplied with the parts should be followed
when replacing components.
For further information and servicing instructions, contact your nearest authorised
service branch (contact details are as shown on the reverse of the front cover of this
manual).
gpd.sunwayinfo.com.cn
gpd.sunwayinfo.com.cn
gpd.sunwayinfo.com.cn
