D1000 SATCOM Terminal User Guide v2.2
Page
13
of
21
© 2021 Blue Sky Network, All Rights Reserved
POWER PORT
Plug the power cable into the port/power
source. Please see the power wiring
diagram for supplying power to the unit.
SERIAL 1 PORT
This port is for connecting data loggers to the D1000
unit so that data can be read and transmitted to
SkyRouter. Sensor data is accessed on the ground
through a web service on the SkyRouter network.
CONTROL HEAD / SERIAL 2 PORT
For D1000A units (i.e., serial numbers ending in “A”), this port is used to
connect the ACH1000 Advanced Control Head that enables intercom-
integrated global voice communication, configurable speed dialing & short
code messaging, email message reading via an LCD display, and
sending flight plans.
Please contact Blue Sky Network or visit us online at
for more information.
MAINTENANCE PORT
This port is used for firmware upgrades and
general box maintenance.