D1000 SATCOM Terminal User Guide v2.2
Page
19
of
21
© 2021 Blue Sky Network, All Rights Reserved
SETTINGS
The Settings screen displays various D1000 parameters. A user may change these parameters, then
enter the correct password and choose a save option.
Explanation of Parameters
Parameter
Meaning
GPS Position Report
Turn GPS position reporting On/Off
Interval
Set regular GPS reporting interval
Message Polling
Ensures that other messages get to the unit (
NOTE
: This feature is
important if GPS reporting is turned OFF
Interval (sec)
Interval for text message checking
Quick Position
Quick Position is always ON
Interval (sec)
Reporting interval when Quick Position is activated
Count
Number of Quick Position messages to be sent
Altitude Based
Turn Altitude-based reporting On/Off
Trigger Altitude (ft)
Determine the altitude above which a different GPS reporting interval
should be in effect
Interval (sec)
GPS reporting interval above trigger altitude
Min. En-Router Altitude Turn MEA alert On/Off
Altitude
At this set altitude, the unit will send a special-type GPS report to
SkyRouter to identify that the aircraft has broken through the MEA
Auto. Take-Off/Landing Turn automatic take-off and landing On/Off
Take-Off Speed (knots) When accelerating through this speed, the unit will send a Take-Off
message
The Settings password is required in order to
make parameter edits on the unit. Change it by
completing the required fields on the bottom of
the Settings screen.
NOTE
:
The password is unable to be reset
if it is forgotten.
PLEASE REMEMBER THE
PASSWORD FOR THE UNIT(S).
