Any operation. Any asset. Anywhere. D1000 SATCOM Terminal User Guide v2.2
Page
14
of
21
© 2021 Blue Sky Network, All Rights Reserved
EMBEDDED SOFTWARE
The D1000 system is capable of GPS position reporting, sending/receiving text messages, and telemetry
data transmission. The user can use HTML webpages for:
•
Access to the Flight Center and to 2-way email messaging functionality
•
Checking t
he unit’s status
•
Changing unit parameters (password protected)
Accessing the Webpages
Upon attaching the external device to the D1000, the unit will make a best-effort attempt to reach the
webpages. You can perform the steps in the following order below to access the pages:
1) Attach the Ethernet cable. Open the web browser and wait for it to resolve its home page to the
D1000’s default page, the Flight Center. If this does not work, try step 2.
2) If the web browser does not
resolve to the default page, try entering “D1000” in the address bar.
Move on to step 3 if this does not work.
3) Enter the
D1000’s IP address:
http://192.168.1.120
in the web browser’s address bar.
If the web browser still does not resolve to the Flight Center webpage, the access device’s IP
configuration may need to be renewed.
RENEWING THE IP CONFIGURATION
To renew the IP configuration of an access device, first open a command line window by doing the
following based on your current Windows operating system. For other operating systems, please consult
that system’s documentation. For PDAs, please attempt a soft reset to renew the IP configuration.
Windows 10
1) Type
“cmd” into the search bar. Click ‘Open’ when the Command Prompt app appears.
2) In the Command Prompt, type
“ipconfig/release” and then press the Enter button on your keyboard.
