Device Manual
device. There is a ‘threshold’ and a ‘duration’ setting. The threshold sets how many G-forces will set
off the alert, and the duration sets how long that force needs to be constantly applied for, before the
alert is set.
!
At its lowest settings, the alert will detect a simple ‘tap’ on the device. At the highest settings, it will
not send an alert until a very strong impact is detected.
!
We suggest you experiment with the settings, if this is of interest, to find what works in your
particular situation.
!
!
Settings / General Options
!
!
!
PIN Code
!
The default PIN is 1234. Here you can set a PIN code to access the device and configuration options
using the app.
!
GPS Wakeup time (Early Wakeup)
!
By default the unit will wake up 20 seconds before the automatic position reporting time, in order to
obtain a GPS fix before transmission. In challenging conditions, or where visibility of the sky is
limited, it may be required to increase this wakeup time to allow the GPS more time to get a fix.
!
Options range from 20 seconds to 3 minutes. By increasing this time, battery life will be decreased.
!
Send Config Report
!
This menu option will prompt the device to send a configuration report detailing its current setup to
our systems for support purposes. Your device will automatically do this every time it is activated, so
you only really need to use this option if asked to by a support engineer.
!
!
7
