5
G
E
H
B
A
C
STEP 1: LOVE SEAT ASSEMBLY
Lay one Back Frame (A) down on a
protective surface. Attach the Back
Frame (A) to the base of the Seat
Frame (B) using 2 Bolts (E) plus 2
Washers (G). Finger Tighten Only.
Attach the Left Side Frame (C) to the
Seat Base (B) using using 2 Bolts (E)
plus 2 Washers (G).
Attach the Right Side Frame (D) to
the Seat Base (B) using using 2 Bolts
(E) plus 2 Washers (G).
Secure the Back Frame (A) to the
Side Frames (C) and (D) using 2
Bolts (F) and 2 Washers (G).
Check to ensure that all parts are
in the correct postion then tighten
completely with the Hex Key (H).
Add the Back Cushions (I), then the
Seat Cushions (J).
ASSEMBLY
ALL TOOLS REQUIRED ARE INCLUDED!
Select a flat clean location to assemble your set - laydown a protective cloth
or cardboard to avoid scratching your set during the assembly process.
Finger tighten all parts. When an assembly is complete, tighten all
fasteners with hex key. Please note: References to Left and Right are
based on orientation from the front of the chair.
C
E
H
G
G
E
H
D
HF
G
I
J
J
I
G
H F
D
H E G
B
A
