8 | www.blueskyoutdoorliving.com
STEP 2
Place a leg [F] against the fire bowl [C]
with the curve of the leg facing out.
Insert a M6 x 35 mm bolt [J] through
the bottom hole from the outside of
the leg and into the lower hole on one
side of the fire bowl. Secure with a
washer [K] and nut [L] on the inside
of the fire bowl.
Insert a M6 x 35 mm bolt through
the top hole from the outside of the
leg and into the upper hole in the fire
bowl. Before securing the bolt with
washer and nut, slip a bracket [D]
onto the bolt and then secure in place.
Make sure the bracket is oriented with
the short tab close to the top edge of
the fire bowl and facing the center of
the fire bowl.
Repeat this process, alternating
the legs [F] and the legs with
decorative rings [G] until all four
legs are attached.
Adjust all the legs so they are level,
then securely tighten all bolts.
STEP 3
Place the log grate [E] in the bottom
of the fire bowl [C].
D
F
G
J
K L
C
C
E
