9
STEP 3
Start building the top ring on the
opposite side of the fire bowl from
were the swing grill will be mounted.
Look for the holes closer to the
middle of the fire bowl – this is where
the swing grill will be secured. Make
sure not to fully tighten bolts until
all four sections of the top ring are
assembled.
Attach one top ring section [C] to
the fire bowl [D] by inserting one
M6 x 15 mm bolt [O] into the top
ring's support arm from the outside,
then through one of the holes in the
top edge of the fire bowl. On the
inside of the fire bowl, insert one
bracket [E] and secure in place with
one washer [P] and nut [Q].
Insert a second top ring section into
the end of the first top ring section and
attach to the fire bowl as described
above.
D
C
Q
P
E
O
