POWER ON/OFF
Press the
MODE
button for 3 seconds to turn the radio on. During
Power On, the radio will beep 2 times with different tones, the LCD will
display all icons for 1 second and the LCD display will indicate the last
channel selected.
To turn the radio off press the
MODE
button for 3 seconds.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel, frequency and Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your mouth.
2. Press and hold the
PTT
button and speak in a normal voice
into the
microphone
. The
TX
icon will appear continuously on the
LCD Display while transmitting.
To transmit a
CALL Alert
Tone/
Vibrate Alert
, press the
SCAN
button twice rapidly.
3. To receive a call, release the
PTT
button. The
RX
icon will appear
on the display when your radio is receiving a transmission.
RECEIVE SIGNAL STRENGTH INDICATOR
During receiving a transmission, the
Signal Strength Indicator
number will appear on the right side of the LCD display. This meter is
on a scale of 1 to 4, with a
“4”
indicating a strong signal and a
“1”
indicating a weak signal.
SETTING THE VOLUME LEVEL
To increase/decrease the Volume Level, press the
S
\
T
button during
standby or receiving mode. The LCD will display the current volume
setting.
CHANNEL SELECTION
Press the
MODE
button once, and then the
S
\
T
buttons to select
one of the 4 channels.
To confirm the selection, just wait for around 1 second until the
FREQ
icon disappears and the
CODE
icon appears.
Page 10
www.bluestarcomm.net
OPERATING YOUR RADIO
Model BR777
Summary of Contents for BR777
Page 1: ...BR777 TWO WAY RADIO OWNER S MANUAL www bluestarcomm net ...
Page 2: ......
Page 27: ......
