Blue Star IM3BSAM01, Manual

Maintenance Of Filters & Replacement

•

Steps for Servicing the Water Purifier.

1. Flushing of the Filter cartridge.

•

Back Flushing need to be done on  External SF, Pre Carbon Filter ,Sediment Filter,Post Carbon Filter & Mineralizer Cartridge.

•

Steps to Flush the Filter cartridge:

➢

External SF 

: Flush the External SF for 5 minutes.Now reverse the connection from input  to the output of Ext SF and flush 

for 10 minutes.Again connect to the input and flush for the 5 minutes.Then connect to the purifier.

•

 Remove the back cover of the device.

•

 Identify the particular filter cartridge and water flow direction as mentioned on the filter cartridge.

➢

Pre-Carbon filter

 : Flush the Pre Carbon filter for 5 minutes. Now reverse the connection from input  to the output of Pre CF 

and flush for 10 minutes. Now again connect again to input to the filter and flush for 5 minutes.

➢

Sediment Filter 

 :  Remove the existing tubings. Connect the output of Pre Carbon filter to the input of the SF and flush for 

the 5 minutes.Now reverse the connection from input  to the output of SF and flush for 10 minutes.Again connect to the 
input and flush for the 5 minutes.Connect the tubing as per actual.

➢

Post-Carbon filter

 : Now remove the output of the Post Carbon filter from UV and start the system and flush for the 5 

minutes. Now reverse the connection from input  to the output of Post CF and flush for 10 minutes. Now again connect 
again to input to the filter and flush for 5 minutes.

•

After the Flushing of the device Install the device with all the tubing in place with QC fittings tightly and all the Water Circuit 
and Electrical Circuit in Place and good condition and charge the Device with power and water Supply.